Burning Resistor.... No picture....

[mkoser]

Originally Posted by ChrisW6ATV

Did you have a raster after the resistor smoked, or only before?

Some sets (color ones, at least) take a DC voltage output from the audio-output circuit/tube, so such a setup could be part of your problem.

No,

I had raster before my recap, now after the recap, burning resistor, and no raster.

I thought I had possibly put a cap in backwards, I checked, then rechecked, then triple checked... They are all in the right way... So I'm thinking now that I shorted something someplace. I need to go down to the shop again with a brighter light and start looking.

I was looking at the schematic and it makes sense that if the audio section goes kaput, then that might take other things with it.

We'll see..

thanks for the help.

In one of my pictures above, you'll see a red err.... black resistor that is burned. I cut one leg of it off so i could power it up and try to meter some other areas.

MK