Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 08-19-2026, 06:45 PM
vol.2's Avatar
vol.2 vol.2 is offline
VideoKarma Member
 
Join Date: Feb 2023
Posts: 435
Quote:
Originally Posted by pac.attack76 View Post
It's as far down as it will go. Anymore would snap the neck. It's where it was when I found it. No wedges or support. I had moved it up after I got it but figured I had it too high because my shim was pretty thick.
That sounds wrong. Something was probably messed with before you got there, and the extra color board inside suggests they gave up on it.

I would assume that your set is not supposed to adjust with yoke movement if you're not getting any change. I know there are such designs, but I've not worked on one before. Sorry, I'm not there in person, so I made an assumption that I shouldn't have.

Looking at the pictures of your neck board, there appears to be knobs that relate to the convergence. I think that is where your solution lies. Do your best to document the effect of each knob before you go messing around with them. A good approach is to make a mark on the knob and the PCB so that you can return each one to it's starting position if necessary. Sometimes I will do that with tape so I can remove it when I'm satisfied.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.