![]() |
|
#34
|
||||
|
||||
|
If you dont get the neg voltage on pin 5 of the 6LB6 either the
hoz osc is dead (6U10 ) or associated parts, OR the 6LB6 is dead shorted. BTW NEVER measure the plate of the 6LB6 OR the damper unless you like fire trucks. Your meter will go up like a Tesla ! BTW #2 the HV regulator ( 6HS5 or 6HV5 ) must be matched with the right damper tube. Look for tags on HV box or layout chart. Wrong pair will work BUT not right & not for long. Good you are taking it slow.... Zeno
|
| Thread Tools | |
| Display Modes | |
|
|