Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Rectangular Screen Tube Televisions (http://www.videokarma.org/forumdisplay.php?f=45)
-   -   Zenith color console 14B9C50 (http://www.videokarma.org/showthread.php?t=276635)

pac.attack76 05-21-2024 04:16 PM

Zenith color console 14B9C50
 
6 Attachment(s)
Just got this one the other day from a friend. Turns on with sound and backlit channel selector but no video. What year would this one be? I figured somewhere between 68 and 72. If more pics are needed, lmk. Really want to see this one working.

Electronic M 05-21-2024 05:56 PM

B is 1972. Does it have raster?

pac.attack76 05-21-2024 06:05 PM

Quote:

Originally Posted by Electronic M (Post 3257342)
B is 1972. Does it have raster?

Ok, thanks. Nope, nothing. Just the heater.

Electronic M 05-21-2024 06:25 PM

Don't run it for more than a minute like that. Check grid voltage on the horizontal output. Should be around -75V. If not your horizontal oscillator isn't running.

pac.attack76 05-21-2024 07:01 PM

Quote:

Originally Posted by Electronic M (Post 3257345)
Don't run it for more than a minute like that. Check grid voltage on the horizontal output. Should be around -75V. If not your horizontal oscillator isn't running.

Isn't that the 6U10 tube? Set needs to be on or just plugged in?

zeno 05-21-2024 07:11 PM

Clean set. Tubes I can see are OEM. White or yellow = OEM, red labeled are replacements.
Hoz out usually fused with a Bel-Fuse Those 2 green squares are examples
Hoz will be black & say 500-1. Center rear on top or under chassis IF it uses one.
Careful of that HO tube, VERY expensive !

Zeno:smoke:

pac.attack76 05-21-2024 07:24 PM

Quote:

Originally Posted by zeno (Post 3257347)
Clean set. Tubes I can see are OEM. White or yellow = OEM, red labeled are replacements.
Hoz out usually fused with a Bel-Fuse Those 2 green squares are examples
Hoz will be black & say 500-1. Center rear on top or under chassis IF it uses one.
Careful of that HO tube, VERY expensive !

Zeno:smoke:

I don't recall seeing a fuse for that but I'll get in there tomorrow and look.

Electronic M 05-21-2024 09:28 PM

Zenith bel fuses are plastic rectangles.

pac.attack76 05-21-2024 09:29 PM

Quote:

Originally Posted by Electronic M (Post 3257349)
Zenith bel fuses are plastic rectangles.

Yeah I seen the two green ones but didn't notice any others.

pac.attack76 05-23-2024 05:13 PM

I'm gonna get in there this evening and look to see if there is a fuse near the oscillator. Also I'll test for reading. Where should I put my leads? Just wanna make sure I get it right.

zeno 05-25-2024 06:12 PM

By convention use the steel chassis for ground ( - or black lead).
Newer sets may have several ground points. Voltage is measured
at the Hoz out tube G-1 (6LB6 ? ). If the voltage in NOT very
negative ( @ -70 to - 90 VDC ) it will eat the H out & in some cases
melt it ! So keep testing under 1 mn til you get a raster.
You can measure from the top, you just need to count the pins CCW.
Pin out is on any data sheet for the tube.

Zeno:smoke:

pac.attack76 05-25-2024 06:22 PM

1 Attachment(s)
Quote:

Originally Posted by zeno (Post 3257401)
By convention use the steel chassis for ground ( - or black lead).
Newer sets may have several ground points. Voltage is measured
at the Hoz out tube G-1 (6LB6 ? ). If the voltage in NOT very
negative ( @ -70 to - 90 VDC ) it will eat the H out & in some cases
melt it ! So keep testing under 1 mn til you get a raster.
You can measure from the top, you just need to count the pins CCW.
Pin out is on any data sheet for the tube.

Zeno:smoke:

Ahh ok, number 5. I'll get in there tomorrow and see what I get. I'll check for that belfuse as well :thmbsp:

pac.attack76 05-26-2024 11:20 AM

3 Attachment(s)
One pic shows a fuse nearby. I couldn't get a reading. Did I do it right?

zeno 05-26-2024 02:52 PM

Looks right. See if the fuse is open.It goes between the hoz out cathode & GND.
If blown you can just jump it out for a FAST check, < 1mn.
Things can get complex now so take it slow, one thing at a time. NO shotguns !

Zeno:smoke:

pac.attack76 05-26-2024 05:57 PM

Quote:

Originally Posted by zeno (Post 3257414)
Looks right. See if the fuse is open.It goes between the hoz out cathode & GND.
If blown you can just jump it out for a FAST check, < 1mn.
Things can get complex now so take it slow, one thing at a time. NO shotguns !

Zeno:smoke:

If I did it right on meter, it showed open. I'll jump it for a few secs. If jumping it, what will it do? Work normally or?


All times are GMT -5. The time now is 09:38 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.