Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #151  
Old 03-27-2024, 08:53 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
The demods and color difference amps are very much like RCA too, except for using the 6MK8 dual pentode instead of separate X and Z demod sections.

Would have to do a detailed analysis to see if they had different color difference gains and angles than RCA.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #152  
Old 03-27-2024, 10:28 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is online now
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
Well people were blasting the "crappy Chroma demoduator" used in the "magget box" When I posted about this on FB vintage TV forum, with stuff like ," I hated the Magnavox tube sets! Chroma demoduator was crap, could not get good flesh tones."

I cant really say, but i DO like the CTC-16XL better, and this is the only and first set i have seen using a 6MK8.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
  #153  
Old 03-29-2024, 03:39 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by Yamamaya42 View Post
Well people were blasting the "crappy Chroma demoduator" used in the "magget box" When I posted about this on FB vintage TV forum, with stuff like ," I hated the Magnavox tube sets! Chroma demoduator was crap, could not get good flesh tones."

I cant really say, but i DO like the CTC-16XL better, and this is the only and first set i have seen using a 6MK8.
Yes they had that reputation. There is a switch we called the brownuator SW.
If on it gives gives a brown cast to the color.You have to also watch the
plate resistors to the demods. Motorolas & Sylvanias too ! Bottom line
is turn off the auto color switches, AFT is the only one to use IMHO.

To be fair Zenith did something similar. Early " Custom" series sets
( 9-181 main board ) that replaced the S3 ( 9-160) had a puky orange pix.
Then better sets came out & had a great pix. A few minutes in the
manuals gave the reason. Better sets had auto color, cheap sets did not !
Turning off the auto color gave the good pix, turning it on gave the orange
pix. So from that point on we modified every one without auto color we sold
& the pix was as good as any.
Told the Boston service rep about it & he told me "this conversation never
happened" and DONT tell Chicago !

enuf fer now
Zeno
LFOD !
Reply With Quote
  #154  
Old 03-29-2024, 05:40 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Quote:
Originally Posted by zeno View Post
... Better sets had auto color, cheap sets did not !...
Zeno
LFOD !
Do you mean the cheap sets had no switch but had autocolor permanently on?
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #155  
Old 03-29-2024, 07:14 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by old_tv_nut View Post
Do you mean the cheap sets had no switch but had autocolor permanently on?
Exactly ! Cheap sets it was always on, better sets had a SW to turn it off.
IIRC it used a Hitachi IC & the same era Hitachis had a displeasing color palette
also. IIRC the original IC was a 221-### later was a 221-###-01
and the color problem went away.

Zeno
Reply With Quote
Audiokarma
  #156  
Old 04-22-2024, 11:57 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is online now
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
So far, knock on semi-fake wood, the Maggie has been behaving after the tube wiggle, I try it about twice a week, and so far, the loss of color sync has not come back, weird!

Dare I put the back cove on it and tempt fate! :O
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
  #157  
Old 10-11-2024, 01:29 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is online now
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
I have finally found the source of the loss of picture (brightness ) that happens once in a very great while with this set, all this time I have been keeping the back off in hopes of nailing it down, this week I did, the brightness pot, R2 is on the front, like the color and and volume, but unlike being hard wired in the RCA and GE sets that amused bandersen a bit, this one can be unplugged, and THAT is the source of the problem, weak connection in PL3, the connector to the brightness pot on the front, I DID clean them, but this one is still giving me trouble, when I lose picture, I grab the wire, move it a bit, and it comes back.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
  #158  
Old 10-11-2024, 02:31 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by Yamamaya42 View Post
I have finally found the source of the loss of picture (brightness ) that happens once in a very great while with this set, all this time I have been keeping the back off in hopes of nailing it down, this week I did, the brightness pot, R2 is on the front, like the color and and volume, but unlike being hard wired in the RCA and GE sets that amused bandersen a bit, this one can be unplugged, and THAT is the source of the problem, weak connection in PL3, the connector to the brightness pot on the front, I DID clean them, but this one is still giving me trouble, when I lose picture, I grab the wire, move it a bit, and it comes back.
Its not uncommon for the pins in the plug that have wires in them to develop bad solder joints...It's especially common in CRT heater pins to the point that they made a special repair tool to crimp the pin onto the wire...If there isn't a service reason to have it unplug you could hard wire it...last year I had to hard wire one terminal of the chromatic switch socket because it was less of a PITA than replacing the whole thing (not like I had a replacement either).
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #159  
Old 10-13-2024, 02:18 PM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
Just replaced the 150K ohm in my Maggie T-933. It went up to almost 300K ohm.
Back on and bright picture and terrible retrace. Loose 6LM8. Pushed it back in and good picture and vertical again.
Like you said, "Maggie Hell".
When I get a chance I'm going to check the 100K resistors in the back control board. Just don't trust them..
Reply With Quote
  #160  
Old 10-14-2024, 07:20 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is online now
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
Quote:
Originally Posted by Zenith26kc20 View Post
Just replaced the 150K ohm in my Maggie T-933. It went up to almost 300K ohm.
Back on and bright picture and terrible retrace. Loose 6LM8. Pushed it back in and good picture and vertical again.
Like you said, "Maggie Hell".
When I get a chance I'm going to check the 100K resistors in the back control board. Just don't trust them..
R101? Yeah, I replaced that w/o question cause I knew it would be bad, along with R85 & R108, a spot check of other resistors in the set found that others were still good.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:03 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.