![]() |
|
|
Thread Tools | Display Modes |
|
#5
|
||||
|
||||
|
Easy first.
The fine tune can do it. Keep in mind if the TV is on ch3 the range on most sets will be ch2- ch4. The FT is multi turn. If the little PCB has plug in transistors pull & clean the sockets. The little electrolytics are known to go & cause AGC problems. IIRC this set has 2 AGC adj. AGC & AGC delay. BUT symptoms say its after the 1st video amp. 73 Zeno ![]() LFOD ! |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|