Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 07-25-2021, 11:57 PM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183
Quote:
Originally Posted by Electronic M View Post
Questions 1 and 2. If you have the back open change those white caps! They can fail at the drop of a hat even if they test good, and when they fail they spray conductive foil everywhere that can short other stuff and increase collateral damage.

You can buy the spade end crimp connectors from any hardware store. What I'd do is strip the one wire and solder on a crimp connector.

Last question. Most makes used the same cathodes for everything from 5" to 27" CRTs. That cathode has a limited amount of electrons it can emit. The bigger the screen the more emission it needs for a given brightness level, thus smaller CRTs last longer and can work better with a weak CRT.
I will use calipers to measure the dimensions of the white caps and order polymer film type capacitors as replacements.

I went ahead and replaced all of the vacuum tubes (except the CRT), with new old stock tubes. However, I was not able to replace the ultor rectifier in the high voltage cage, because the top cap was very tight and I worried I might damage it when removing it. This is my first tube based ultor rectifier. Question #8: Any tips for removing the top cap without damaging it?



I also cleaned the glass on the triode section of the CRT, so you can now see inside it. It is a very large electron gun for such a small CRT. Its circumference is as big as the horizontal output tube, which is also a very wide vacuum tube.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:21 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.