Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 01-11-2021, 05:39 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by Jon1967us View Post
Yeah, that kinda just started happening...

When we're talking heater leakage, I thought we're concerned about leaking into the Cathode. Could it be leaking into the grids? I've already subbed out all the tubes, and this makes no change.

Not sure what else there is to do other than modding it by adding the ballast resistors from the Sams.

Just about every relevant component has been changed. The remaining original resistors are within tolerance.
It's the .2v AC on the cathode of your sync/DC restorer tube that worries me. It stands to reason that same AC is then present at pin 2(grid) of the CRT? When it's doing it's hula, what if any AC do you measure on pin 3(cathode) of the CRT? As an experiment you could hang a few uf's cap alternately from pin 2 or 3 of the CRT to ground to see if that clears up the hula. Observe polarity of whatever DC you measure on those pins to ground. Of course you won't get any video with the cap on pin 3 of the CRT, but at least you'll find out if there's AC modulating the signal there. Somethings got to give.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.