|
|
|
#11
04-02-2020, 11:51 AM
|
|||
|
|||
|
Addendum
Lacking a variac or a resistive load, what you could safely do is this - apply mains power to half of the hv secondary. The whole xfmr will then be in step-down mode. The voltages coming out of the other windings will be a given percentage of their normal values, probably around 20 - 30% or so. Allowing for the step-down factor, it'd be easy to identify which winding is which.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode