Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2015, 05:18 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
First things first, that white cap must be changed. Mine has all of its original safety caps and I haven't risked powering it up since last May even though it was working fine. I have the replacements and will install them fairly soon when I get a good soldering station.
Reply With Quote
  #2  
Old 03-14-2015, 07:23 AM
Marco-nix's Avatar
Marco-nix Marco-nix is offline
VideoKarma Member
 
Join Date: Apr 2014
Location: somewhere on earth
Posts: 305
Quote:
Originally Posted by Jon A. View Post
First things first, that white cap must be changed. Mine has all of its original safety caps and I haven't risked powering it up since last May even though it was working fine. I have the replacements and will install them fairly soon when I get a good soldering station.
I have no idea if it is a safety cap or a lytic.. but from what I see it's a big one. for a soldering gun, i paid 3 dollars for 2 guns. Models M030 - 30-35W.
Reply With Quote
  #3  
Old 03-14-2015, 07:35 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
I've been following this thread for some time, and wondering why it remains in the wrong forum ......just wonderin'.....
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
  #4  
Old 03-14-2015, 10:05 AM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by Marco-nix View Post
I have no idea if it is a safety cap or a lytic.. but from what I see it's a big one. for a soldering gun, i paid 3 dollars for 2 guns. Models M030 - 30-35W.
I've never seen a white electrolytic capacitor. Bad white safety caps are marked 22-5001.

A cheap iron should be fine for this job due to the lack of delicate circuit traces in the area. As for me, I just don't want to drop extra funds on an iron I'll use only once.

Oh yeah, do *not* use acid-core solder.

Last edited by Jon A.; 03-14-2015 at 10:08 AM.
Reply With Quote
  #5  
Old 03-14-2015, 06:44 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
We mostly used Weller irons, the style popular in the 70's on.
The high temp round tip was a dream on the Zenith terminal strips.
For soldering heavy things like the grounds on filter cans the
black gun was used. They must have sold 100 million of them.
We also had a bigger brown gun. That was good if you wanted to
solder two Buick Electra 225's together.
Temp controlled irons can be very touchy, follow any instructions
to the letter & they give good service. We tried other brands but
you got what you paid for.......

73 Zeno
Reply With Quote
Audiokarma
  #6  
Old 03-15-2015, 10:56 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by zeno View Post
We mostly used Weller irons, the style popular in the 70's on.
The high temp round tip was a dream on the Zenith terminal strips.
For soldering heavy things like the grounds on filter cans the
black gun was used. They must have sold 100 million of them.
We also had a bigger brown gun. That was good if you wanted to
solder two Buick Electra 225's together.
Temp controlled irons can be very touchy, follow any instructions
to the letter & they give good service. We tried other brands but
you got what you paid for.......

73 Zeno
8200 is the smaller two-wattage gun, and the D550 is the larger "solders anything" gun. #12 bare copper wire has made a tip or two for me over the years. I own two of both - one of each in the house, and one of each in the shop. Thrift stores around here used to sell 'em cheap before they started using ebay pricing. I spent around 30 bucks for all 4 - and that includes the original $22 for my first 8200 back in the late 70s...

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
  #7  
Old 03-15-2015, 11:15 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by zeno View Post
We also had a bigger brown gun. That was good if you wanted to
solder two Buick Electra 225's together.
Don't give me ideas...

Anyways, a Weller station is what I have been planning for. Fortunately I can actually get that locally.
Reply With Quote
  #8  
Old 03-16-2015, 07:46 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by Jon A. View Post
Don't give me ideas...

Anyways, a Weller station is what I have been planning for. Fortunately I can actually get that locally.
I used Weller's WTCPN stations for years, and had little problems, but in 2009, I got a Hakko 936 station, and have had ZERO problems. I like it so much, I popped for their 808 desoldering gun - best thing since my Pace MBT-100 I got in 1989, but that nearly bankrupted me. Hakko is good stuff! Sometimes MAT Electronics would have a special on them - I paid full price elsewhere, but give MAT a try..

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
  #9  
Old 03-18-2015, 01:27 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by Findm-Keepm View Post
I used Weller's WTCPN stations for years, and had little problems, but in 2009, I got a Hakko 936 station, and have had ZERO problems. I like it so much, I popped for their 808 desoldering gun - best thing since my Pace MBT-100 I got in 1989, but that nearly bankrupted me. Hakko is good stuff! Sometimes MAT Electronics would have a special on them - I paid full price elsewhere, but give MAT a try..

Cheers,
I'll check that out, thanks for the tip.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.