Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-19-2015, 05:42 PM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
[QUOTE=Zenith6S321;3126651]The 25MC30 schematic shows the 1.5K resistor connects to pin 1 and 9 of the 3AT2. The 3AT2 PDF shows that pin 4 is a no connect. So pin 4 could be used as a tie point for connecting the other end of the resistor to the anode lead. The schematic does not show this, so I'm guessing.

Dave

Hi Dave, is there any way that you can post something showing this resistor connected to pins 1 and 9. Reason being is that if it shows it there then both ends are interconnected to the cathode. According to the .pdf on the tube, pins 2, 5, 6, & 9 are the same as pin 1. Now the second anode lead does for sure connect to one end of the resistor, but I dare to ask is it at a no connect as a tie point or is it at 1 and 9. There is a big difference that presents obvious concerns. My lack of completely understanding the circuit may lend to this.

Sorry to keep going back to this, but what I am reading surely makes me wish that I could see a for sure Zenith reference to this.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"

Last edited by Tubejunke; 02-19-2015 at 05:47 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.