Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-16-2015, 12:51 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by NewVista View Post
I just replaced 1.5k resistor on my 25LC20 (before reading this) old one looked all right but measured low (1.26k). Low resistance is also a sign of heat stress/damage. Maybe it's there to protect rectifier and or Pic tube or people from 22kv!

The HV rect filament wire was hardened from heat and had 1/2" bare stripped connections to socket! Who did that? Not factory?

There was a lot of wax melted from flyback!

The 2,2k final Horiz Output screen resistor looked cooked - was very high 11k! but set worked.

Will soon see if this corrects my vertical lines (is this "diodehausen"? screen picture)
Regarding the HV rect filament wire, that wire is resistance wire and probably gets warm in operation. The insulation probably receeded from the heat. That I've seen before.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:29 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.