Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 03-24-2013, 05:42 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by technicolor View Post
the metal cylinders where barely the nipple of the tube is sticking out.
In the case where the tube comes out of the set with the shield still on it: I've used a nutdriver that has a hollow portion that will accommodate the nipple without touching it. Nutdriver business end goes atop the top of the tube, at the nipple. Then you should be able to slide the shield upwards with respect to the tube, towards the handle of the nutdriver. A small piece of electrical tape, with a hole for the nipple, can be placed on the nutdriver face to lessen the stress from metal to glass contact (I always got away without this, seems tube glass is fairly tough).
__________________
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:35 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.