![]() |
|
|
|
#1
|
||||
|
||||
|
Unfortunately, I, too, like the round screen more than the rectangular one that I have on my RA-113.
I'm so glad that these wonderful DuMont sets are being rediscovered. I had only seen one DuMont before I got mine, and understood that there was not a dealer in the Asheville NC area. Recently, I was told that the local RCA, Magnavox dealer, Dunham's, would special order them on request. I've started working on mine, and now have good clear sound thru the tuner. |
|
#2
|
||||
|
||||
|
I believe the RA-112 and RA-113 are pretty similar. They are covered in the same Sams manual. This RA-113 article has some restoration notes that may be helpful:
http://antiqueradio.org/DuMontRA-113Television.htm I was playing my RA-113 last night while wrapping Christmas gifts in the TV room. Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html |
|
#3
|
||||
|
||||
|
Phil, I just finished reading your detailed article about the restoration of your DuMont. I will be using it when I get started on the paper capacitor replacements. I hope I dont upset anybody, but I'm installing the electrolytic capacitors under the chassis. There is lots of room under there!!
I saw your link to the high voltage capacitors, and will be ordering these soon. I'm looking forward to seeing a picture on this beauty. I have Gone With The Wind, too, along with lots of other goodies Thank you for taking the time to chronicle your work. I really appreciate having this as a reference. Bruce |
|
#4
|
||||
|
||||
|
Yeah...nothing wrong with hanging electrolytics under the chassis. I restuff 'em myself.
Just go with higher voltage rated caps when you replace them. As far as Electrolytics are concerned, go with the nice 105 deg centigrade rated Nichicon or Panasonic ones from Mouser Elecrtronics. Good stuff, cheaply priced, shipped immediately. What more could you want. But, you knew that already...
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|