Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Movies, shows, & programs

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2011, 03:33 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
QAM and clear QAM:
http://support.elgato.com/index.php?...&kbarticleid=8
Ask your cable provider which (if any) channels are clear QAM, for the other QAM channels a set top box or "cable card" will be necessary.
jr
Reply With Quote
  #2  
Old 08-17-2011, 08:28 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by jr_tech View Post
QAM and clear QAM:
http://support.elgato.com/index.php?...&kbarticleid=8
Ask your cable provider which (if any) channels are clear QAM, for the other QAM channels a set top box or "cable card" will be necessary.
jr

Thanks for the link. I read the article from elgato.com and found out exactly what clear QAM channels are -- but there was no mention in the article of the need for a STB (set top box) to receive QAM cable channels. The flat-panel TV I'll be getting soon supposedly will receive, without a box, anything on the cable except HBO, Cinemax, Showtime or other pay-per-view movie channels; there was no mention made in the instruction manual that any sort of external converters would be necessary to receive normal cable channels.

I'm glad I decided to get a flat-panel TV, as I read in the article at elgato.com that analog cable is eventually going to be phased out; I had been wondering for some time if or when that type of cable service would end. Now I know, and it is also clear to me that the days of being able to simply hook up a cable line to an old TV and get even 12 channels are just about over. I don't know if cable-ready sets like Zenith's System 3 models of the 1980s, which were designed from the start to receive over 100 channels, will continue to operate normally when analog cable eventually ends in this country, of if a cable box will be required if one is to keep watching these aging cable-ready sets. Of course, if everything (including broadcast channels) is eventually converted to 100 percent digital, such TVs will require a cable box to receive any kind of television signals.

I think the day is coming when most unmodified TVs, even "cable ready" sets, will be useless for anything other than watching VHS video tapes or DVDs. Their cable-ready tuners will be of no use since they cannot receive DTV channels; however, I think there will always be people who wonder why their 1980s-vintage TV set won't work any longer unless a cable box is used. There are people who will get very upset when they find out that they can no longer use the original remote to change channels on their Zenith System 3 color set, being required instead to use the small remotes that come with STBs (over-the-air set top boxes) or the larger remotes that are standard equipment with cable company boxes; that's too bad, but time marches on and technology (like everything else) is constantly changing; we either adapt to the changes and accept them or get left behind in the dust. Some people just don't or, for whatever reason, cannot grasp that concept; again, it's too bad, but that's just human nature.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #3  
Old 08-17-2011, 09:12 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
This information may help:
http://www.timewarnercable.com/dayto...cablecard.html

Depending on your level of cable service, a box or card may be required to unlock the channels that you wish to view. HBO, MAX, Showtime for sure, but in addition, your cable system likely has several tiers of premium service, and therefore needs to be able to unlock those channels for subscribers that pay extra for them, while excluding those that don't pay. That is why a box or card is necessary.

jr

Last edited by jr_tech; 08-17-2011 at 09:20 PM.
Reply With Quote
  #4  
Old 08-17-2011, 11:31 PM
basil lambri basil lambri is offline
VideoKarma Member
 
Join Date: Dec 2006
Location: Cleveland, OH area
Posts: 31
Quote:
Originally Posted by Jeffhs View Post
Thanks for the link. I read the article from elgato.com and found out exactly what clear QAM channels are -- but there was no mention in the article of the need for a STB (set top box) to receive QAM cable channels. The flat-panel TV I'll be getting soon supposedly will receive, without a box, anything on the cable except HBO, Cinemax, Showtime or other pay-per-view movie channels; there was no mention made in the instruction manual that any sort of external converters would be necessary to receive normal cable channels.

I'm glad I decided to get a flat-panel TV, as I read in the article at elgato.com that analog cable is eventually going to be phased out; I had been wondering for some time if or when that type of cable service would end. Now I know, and it is also clear to me that the days of being able to simply hook up a cable line to an old TV and get even 12 channels are just about over. I don't know if cable-ready sets like Zenith's System 3 models of the 1980s, which were designed from the start to receive over 100 channels, will continue to operate normally when analog cable eventually ends in this country, of if a cable box will be required if one is to keep watching these aging cable-ready sets. Of course, if everything (including broadcast channels) is eventually converted to 100 percent digital, such TVs will require a cable box to receive any kind of television signals.

I think the day is coming when most unmodified TVs, even "cable ready" sets, will be useless for anything other than watching VHS video tapes or DVDs. Their cable-ready tuners will be of no use since they cannot receive DTV channels; however, I think there will always be people who wonder why their 1980s-vintage TV set won't work any longer unless a cable box is used. There are people who will get very upset when they find out that they can no longer use the original remote to change channels on their Zenith System 3 color set, being required instead to use the small remotes that come with STBs (over-the-air set top boxes) or the larger remotes that are standard equipment with cable company boxes; that's too bad, but time marches on and technology (like everything else) is constantly changing; we either adapt to the changes and accept them or get left behind in the dust. Some people just don't or, for whatever reason, cannot grasp that concept; again, it's too bad, but that's just human nature.
You don't need to have a set-top box to watch QAM cable channels. You can get them with basic cable TV service with a coaxial cable from the cable plug outlet on the wall. Maybe that also depends on the cable company you have but I know that if you have a cable company with cables like Time Warner Cable that we have in northeast Ohio you can get them. Just make sure, if you use basic cable, to auto program scan all the cable channels on your new TV to make sure that you get all the digital channels like 19-1, 19-2, 8-2 etc.

If you have a set-top box you can get more channels than basic cable. You can get something like 300 channels.

BTW, congratulations for your new TV!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:59 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.