Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 06-29-2011, 01:30 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,829
Quote:
Originally Posted by toober View Post
If you ever need to reproduce more of that zig zag veneer (or any complex cutout veneer), here is a good trick:

Cut a veneer strip a little longer than the size you need, without all the zig zags and cutouts. Clamp this strip between two nice stiff hunks of similar wood, then run the whole thing slowly through a table saw with a sharp dado blade, cutting out the pattern with as many passes as you need. Unclamp, and find a perfectly shaped piece of veneer within. You can even do multiple strips at once. You can also do this trick with a router table.

--
Will
Thanks for the tip!

I did a little test with the grain filler before moving on to the real cabinet.

A glued a scrap of mahogany veneer to a board and stained it.


I wonder how long this can had been sitting around ? It took about 20 minutes to get a smooth consistency.


I mixed a little with some mineral spirits as indicated on the can and applied a thick coat. Probably a little too thick.


Once it dried to a haze, I wiped off the excess with burlap going against the grain.


Finally, 3 coats of Deft sanding sealer, a little sanding with 400 grit and 3 coats of Deft gloss.

After the lacquer cures, I'll rub out the finish with pumice and rottenstone.


Now onto the real thing.
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery

Last edited by bandersen; 06-29-2011 at 10:48 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:07 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.