Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 03-21-2011, 03:53 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I've scrapped dead tube VGA monitors, but I was after the high voltage caps and power resistors and the damper diodes make for good high voltage rectifier diodes in tube hifi audio amps. The bridge rectifiers for their switching power supplies were nice too. And lots of heat sinks. And inductors for higher frequency work. So now I have a pretty well supplied "junk box" of parts. usually it was the horizontal output transistor and flyback that failed to cause the monitor to be junked, but most of the rest of the parts were still fine. But it took me a lot longer to tear down a "chassis" than the guy in the video.
__________________
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.