Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-25-2010, 08:09 AM
M3-SRT8's Avatar
M3-SRT8 M3-SRT8 is offline
VideoKarma Member
 
Join Date: Oct 2007
Location: Worcester, Mass
Posts: 652
Hey, Bob.

Don't worry about the red paint in the brass bezel lifting or crazing when you clear coat it. It's so dried out it doesn't matter if it was lacquer or enamel. The clear coat shouldn't react to it.

...and even if it does (highly unlikely) you could squeegee in water based red paint AFTER a lacquer clear coat. I did this with my GE 805 brass escutcheon, and the fresh red paint really made it pop. Wait until the clear lacquer hard dries.

To tell you the truth, I would buff the hell out of the shiny portion, mask it off with a rubberized tape, then lightly glass bead the matte section for a uniform finish. Use fine bead and light pressure. Clear coat the entire brass, let hard dry for a week, and fill in lettering with red paint.

Tamiya Color Flat Red XF-7 is a perfect match for that shade of red, BTW. It's water based, and won't react with the lacquer. Available at good hobby shops...

Last edited by M3-SRT8; 10-25-2010 at 08:28 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.