![]() |
|
#11
|
||||
|
||||
|
I'm making good progress on the cabinet this weekend.
First up, I stripped it using a citrus gel stripper by Zinsser. ![]() Then, a liquid stripper and steel wool to get any remaining finish. ![]() Than, a neutralizer. ![]() I coated both the top substrate and the new veneer with a couple layers of diluted Titebond II wood glue. After it dried overnight, I ironed it on and trimmed the excess. ![]() I'm going to use grain filler this time. I've used multiple coats of shellac and sanding before, but this Mahogany veneer has a really open grain and it takes forever. The Behlen water based stuff is easy to apply, no fumes and cleans up easily. ![]() I worked it in across the grain with an old credit card. I'll let it dry for a while and sand it lightly. ![]() Finally, my toner lacquer showed up. Van Dyke Walnut is a great match as I had hoped
|
| Thread Tools | |
| Display Modes | |
|
|