![]() |
|
|
|
#1
|
||||
|
||||
|
I've had it hope for a couple days now. Here are some more details.
First off I was concerned about the damaged CRT base, but it turns out the tube is just fine. That's really good, I've heard these are few and far between. The widowmaker. I'm not sure what they mean by "insulating coating". Seems like just glass to me ![]() ![]() ![]() The base reads 'factory rebuilt'. Anyone know what the "S" on the neck means ? ![]() It's good ![]() ![]() A little size comparison. 5AXP4, 19AP4 and 10BP4. I've never work with such a large CRT before! ![]() Here's the chassis. It appears to be all original. ![]() The tuner is quite a piece of work ![]() There's a crazy mix of tube brands and about 40% are weak or bad. I bet this set saw a lot of use. ![]() I can't wait to see those orange knobs light up again ![]()
Last edited by bandersen; 06-18-2010 at 10:15 PM. |
|
#2
|
||||
|
||||
|
Can't really see how it works . . . wafers?
Phil |
|
#3
|
||||
|
||||
|
Yes, it appears so. What I'm not sure about is the hole in the chassis for each channel. There's an arm with a hole in it sticking out the the selector shaft. The hole lines up over the selected channel. Perhaps it's just an aid for aligning the coil ?
|
|
#4
|
||||
|
||||
|
I was finally able to get back to my e-mail this weekend and found two e-mails from Tom. Wow is he a nice guy! He really helped me out with the details of this set. Here are the photos he provided. I can't tell if it's spelled VanDyke or VanDyck. Either way, it's one great looking set.
Bob, thank you for all the photos and attention you've already given the set. It's all much appreciated, thank you. |
|
#5
|
|||
|
|||
|
what is the game plan on that CRT socket? leave and use as is, replace it, or try to build it up somehow? I assume no hurry on what to do until the set is closer to working.
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Some manufacturers coated that glass portion of the CRT with some sort of insulating paint, beyond me as to why. I didn't think glass could be inproved upon as an insulator. The pic is of a 16GP4 that was coated.
|
|
#7
|
||||
|
||||
|
Interesting. That portion on this CRT seems to have maybe a hint of old coating. Otherwise, just glass. Maybe they removed it during the rebuild process ?
|
|
#8
|
||||
|
||||
|
Quote:
Now that I've inspected it closer, I think I'll try to build it up with something like 2-part epoxy. All 5 pins and the center key are in good shape. So is the entire circumference of the end of the base. Reading all the warnings on that CRT are making me a little nervous of messing around with it. Last edited by bandersen; 06-21-2010 at 09:28 PM. |
|
#9
|
||||
|
||||
|
Quote:
![]() "...2 control knobs on front panel are all that are needed for normal operation..." Ha! Pull off those two 'simple' controls and you'll find all the other adjustments lurking ![]() ![]() Cool that the tuner has UHF capabilities. I counted 15 positions when I rotated it. If we're really lucky, it has the right parts to pick up some of the few remaining analog UHF broadcasts in our area. I really hope I won't have any need to go poking around in there. (click for hi-res version)
Last edited by bandersen; 06-22-2010 at 05:08 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|