![]() |
|
|
|
#1
|
|||
|
|||
|
I still don't think it will take hold. Not as long as you need to wear extra headgear to enjoy the 3D experience.
Now if they come out with a format that looks 3D with no need for the viewer to wear glasses or take any other special accommodations, that may catch on. |
|
#2
|
||||
|
||||
|
Robert Grant says:
"(A biased opinion, I've been a stereo photographer for 25 years)." What do you use for a camera? jr |
|
#3
|
||||
|
||||
|
Quote:
Perhaps the most "cliché" stereo camera, the Stereo Realist (David White Co., Milwaukee) I've also dabbled in twin-camera rigs, Sputnik (an old medium format stereo camera from guess where), and digital using what is called "the cha-cha technique" (talking one shot, moving the camera to one side, then shooting another). |
|
#4
|
||||
|
||||
|
Quote:
|
|
#5
|
||||
|
||||
|
Quote:
My mistake was recently buying a Samsung Bluray player instead of waiting. The firmware can be updated, but I doubt that they'll provide a 3D upgrade when they can use that to sell new players. I can't imagine they'll cost $1K more than the standard Bluray though. John |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
Years ago, I saw a demo of a similar system that used a JVC CED player. At that time the Shutter glasses were not wireless, and IIRC were plugged into the disk player. Jaws 3D looked pretty scary but some flicker could be observed, at the low alternating 30 Hz rate. Robert_Grant... Very cool about the stereo photography ! jr Last edited by jr_tech; 03-12-2010 at 12:48 AM. |
|
#7
|
||||
|
||||
|
Quote:
The answer to the first part is no. It refreshes at 120HZ max. To the second part it's yes, no, maybe.The set has an emitter jack that is used to sync the glasses via a direct cable or IR. The Mitsubishi was designed before there was a 3D standard for packaged media like Bluray and DVD. They also warn that it may not be compatible with future 3D standards. The model I have requires 1080p 60HZ and that the device support checker board format for video and images. I suspect that means there will be zero chance that it will work with the new Bluray 3D players. I hope it works with Directv. It's a software update for the receiver so maybe they'll try to make it work with all existing sets. Albeit, some flicker. John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|