Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #31  
Old 12-05-2009, 01:14 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Late '80's Emerson sets were made by Orion. I actually fixed two late '80's emerson's with the side mounted chassis. Both were full of bad solder connections and bad caps in the vertical circuit. I was a little shocked to get two of these in that actually still powered up. I was getting these when they were only a few years old with toasted flybacks, yokes, and shorted HOT's.
Reply With Quote
  #32  
Old 12-05-2009, 06:35 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I am curious, what makes a bad tv? is it design/assy/parts? esp things like flybacks/crts, are they just poorly designed/overstress/cheap builds.

Seems odd that a process devolves, I have old sets that seem rock solid, it follows that process and procedures should produce better goods (I am not so naive to think that other consideration conspire to reduce quality, just wonder where those consideration hit).
Reply With Quote
  #33  
Old 12-05-2009, 06:49 AM
Dude111 Dude111 is offline
Analogue is Awesome
 
Join Date: Oct 2009
Posts: 2,735
Quote:
Originally Posted by matt_s78mn
What vintage color TVs were the worst design
Im not sure which VINTAGE tv was the worst BUT I SURE KNOW WHICH IS THE WORST NOW!!

THIS NEW FLAT SCREEN GARBAGE!! -- I much prefer the classic TV i have always watched and love (And in analogue if possible)
Reply With Quote
  #34  
Old 12-05-2009, 10:16 AM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Reading this post sure has brought back some memories. I worked in my Uncles TV sales/service shop in the late 70's early 80's in a small town in Nebraska. We sold Zenith, and for a time he carried a secondary brand as well, so as not to lose a sale to the people who couldn't afford a Zenith. (they were expensive). I remember when the recalls hit the CC2's for the safety cap, and we even had a Zenith that the cap failed and blew out the picture tube. To Zenith's credit they did replace the tube altho the set was out of warranty. We were busy with service calls replacing that cap on every affected set we sold.
For worst sets on our service route a few stand out, and I can still hear him bitch when we had to go out yet again to that service address.

1) RCA CTC-38's were one of the few sets RCA put out where they went "on the cheap" Like clockwork, EVERY summer (once the heat and humidity came up) the calls came in for "no picture and a bad smell" Those sets ate up flybacks like there was no tomorrow. Coupled with color alignment problems (which you never saw on any other RCA chassis) also the majority of 6GH8's that were sure to be bad made that chassis a POS in my opinion, altho it was a money maker from a repair standpoint.

2) Any Motorola. Tube color sets the worst, followed by the solid state "works in a drawer", with the 4 tube hybrid behind, which interestingly followed the solid state set in production. Those sets always were glitchy and had a LOUSY picture.

3) Magnavox tube sets

4) ANY Admiral

We also had a Western Auto and Gambles in town, so we got stuck doing a repairs on those. Trutone was the WORST. (Wells Gardner and rebadged GE's).
Gambles by the mid to late 70's were mostly rebadged Toshiba Blackstripes. I have a 77 13" Coronado that is one such set.

Finally, I remember for a bit my Uncle sold GE sets as a secondary in 80-81. Not sure of the chassis, but they were the sets with the VIR color correction. They were the only set I was aware of that managed to blow up ON the sales floor. IIRC it was a Yoke issue, and they had LOUSY pictures to boot.
I'm sure more will come to mind, but the ones I listed seem to stand out the most.
Reply With Quote
  #35  
Old 12-05-2009, 10:50 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by rca2000 View Post
I personally feel that these are the WORST crt's ever made. They beat the Sony 26" 710AB22/A670XXX
I respectfully debate... The only issue with the 26" Sony tube was that they went flat after a few years, but at least they didn't short and blow the power supply without warning, like the Zeniths did. Maybe I'm prejudiced in favor of the 26" Sony because I got to sell a lot of those upgraded replacement tubes, and they're a piece of cake to install and align. The whole installation I had down to 20 minutes with perfect purity and convergence. Touchy on obeying the setup procedure though. If you didn't use a scope to set the G2 voltages and left them high, you'd kill the new tube by overdriving the G2 in short order. I did it correctly, and typically would get 10 years out of the new tube, and the customer would be so happy that I actually replaced some of them for a third life of the TV.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
Audiokarma
  #36  
Old 12-05-2009, 12:27 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
I stand by my vote that the Magnavoxes are worse than the GEs, my portacolors never gave me much trouble even though the picture wasn't that great, one Magnavox I had actually had a flyback catch fire, stunk up my place for days. Then again, I never had a GE console.

Now I'll say something more controversial, while I really think the flat chassis Zeniths are 100% deserving of the reputation they have here, I really don't think the same of the chromacolor II era sets. While I'm not at all nominating them for worst color set, as they do indeed produce a great picture, the two I've had had all these intermittent faults, some were due to bad solder joints, loose connections where the modules plug in, or that stinking chromatic button which always seems to get gummed up. On either set I had I never managed to track all of the minor intermittent issues they had down. Great sets when they work, but they didn't hold up nearly as well over the years as their flat chassis counterparts.

Last edited by Adam; 12-05-2009 at 08:54 PM.
Reply With Quote
  #37  
Old 12-05-2009, 12:47 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
I unfortuanately would have to agree with Adams opinion concerning CC2 era sets. Hard for me to admit as I unpacked and sold those sets when they were new.
When new, there was NOTHING out there that produced a better picture, and they still beat out most sets today after 30+ years, but they have proved to be glitchy once they had some age on them. In all fairness, it was a design flaw that all modular sets of that era seem to have. From a design point, it was to save time and money on repair. If one component failed you simply replaced that module. However most manufactures that went that route all had the same problem once they aged. RCA XL100's with a vertical chassis is just as bad. Zenith has that damn problem with the Chromacolor control. RCA had problems with the slider controls.
I always keep a "daily watcher" in my home office. Right now, I have a top of the line System 3. Pretty good performer, but the picture tube is starting to show its age. Those tri-focus tubes didn't hold up like the Chromacolor dot matrix tubes did. My other set I use when I swap out the System 3 is a 75 Chromacolor 2. When that set is in use, I always seem to have to replace a module or 2 to get it working perfectly. In all fairness, it IS 35 years old.....
Reply With Quote
  #38  
Old 12-05-2009, 01:53 PM
sampson159's Avatar
sampson159 sampson159 is offline
sampson159
 
Join Date: Sep 2007
Location: columbus,ohio
Posts: 2,170
those sanyos from the mid 70s.uggggghhh!very nasty little sets.ge,rcas from the 90s,zenith of the same vintage.bad,bad,bad sets.i had a couple of really good wells gardners from the early 70s,(hybrids un the j c penny name).they both had rauland crts and were good performers.one was in a combo that also had a blasting stereo.we could rock the zip code with that monster.solid wood cabinet that i had too move too many times.some of those later sets were junk.i did like the 2 i had.ge s had a nice picture when they were right.those just werent right very long.many stores had name brands that were nightmares too.too many bad ones and not enough good ones to name.
Reply With Quote
  #39  
Old 12-05-2009, 03:52 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
For me it's pretty much the early 90s Daewoo-built 13" with remote and osd the case was brittle and awful and the screwholes stripped their holes after the first back removal. Chassis was a pos single-pcb with the typical undersized flyback and no-name cap's and diodes. I came across 2 or 3 in total and couldnt manage to get any working except 1 which had a weak crt (couldnt get proper greyscale) saw one trashed a few months back and wouldnt even slow down the car to check it out...

Older sets? well all tube sets had problems in the longrun as opposed to a properly executed SS design IMO on the basis of additional ambient heating inside the sets which tended to eat up lytics and resistors more so i cant really decide.
Reply With Quote
  #40  
Old 12-05-2009, 04:07 PM
AUdubon5425's Avatar
AUdubon5425 AUdubon5425 is offline
VideoKarma Member
 
Join Date: Aug 2008
Location: Picayune, Miss.
Posts: 1,769
Going on personal experience as a consumer (because I'm new to TV repair) the worst sets I remember were a 1987 (maybe '88) RCA ColorTrak 25" remote tabletop Mother bought to replace the CTC-40. It had little chrome tabs for the controls integrated in a feature line that you pushed down, and a flip-down door below for the color/contrast/etc. Besides the short life of the set, at night when a semi would pass it would often turn itself on at full volume - usually around three o'clock in the morning - blasting whatever was on the trucker's CB.

Also the 89/90 Zenith 19" (Sentry II I believe) which had a push on/push off mechanical power switch. Thankfully the button was plastic - Mom went to turn it on one day and there was a loud pop and sparks/smoke shooting out the switch. It was about 4 years old.
Reply With Quote
Audiokarma
  #41  
Old 12-06-2009, 11:22 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by AUdubon5425 View Post
Going on personal experience as a consumer (because I'm new to TV repair) the worst sets I remember were a 1987 (maybe '88) RCA ColorTrak 25" remote tabletop Mother bought to replace the CTC-40. It had little chrome tabs for the controls integrated in a feature line that you pushed down, and a flip-down door below for the color/contrast/etc. Besides the short life of the set, at night when a semi would pass it would often turn itself on at full volume - usually around three o'clock in the morning - blasting whatever was on the trucker's CB.
I know that problem VERY well. It's actually an easy fix. Bad solder connections in the system control module, where the plug is soldered to the board to mate it to the tuner. I've fixed literally 1000s of those, all with the same symptoms. People would blame the control buttons, as playing with (or banging) them would knock the system controller back into behaving for a short while.

I fixed my wife's CTC-120 19" Color Trak about a year ago, and she had been dealing with touchy volume buttons since he ex-husband had it in high school in '83. It would either be too soft or too loud, and would sometimes give sudden bursts of blaring loud volume for a split second. She had no idea that there was even a problem... Thought it was made that way since it had been doing that for 25 years! Probably that's why it's the one thing her ex-husband let her have.


Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
  #42  
Old 12-06-2009, 10:48 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
There are a couple other GE's that I just thought of that weren't that great. One was a huge projection set from the '70's, the YP chassis, IIRC. It was basically a small screen color TV that was situated so that it's image was projected on a large screen. This thing was huge and very heavy.

Then, there was another big screen that had 3 tubes, probably their first three tube model. The CRT's had large necks and I think the chassis was an ED or EP.
Reply With Quote
  #43  
Old 12-07-2009, 02:31 AM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
Quote:
Originally Posted by rca2000 View Post
ANY set with the 23EGP22 CRT sucks!!!
Isn't that the one that one of our members tried the hot-air method of cataract/safety glass removal on, and the CRT blew up in his face?
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
  #44  
Old 12-07-2009, 02:36 AM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
Quote:
Originally Posted by ctc17 View Post
Every time I pull a sams folder I see all these random brands, Coronado, Starlite, Supre-Macy on and on. I never see any of these sets anywhere. Is that because they were all junk?
I bought a Starlite (made by Randix?) 13" color TV in 1995. It was the first $100-or-less color TV I ever saw. I still have it, and it works like new still. I did have to go through three of them to get a good one at the time, though.
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
  #45  
Old 12-07-2009, 02:39 AM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
For the worst color TVs, I would include all sets that lack DC restoration/black-level retention. That includes the Starlite I mentioned above...
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.