Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-22-2008, 02:41 PM
Duane's Avatar
Duane Duane is offline
VideoKarma Member
 
Join Date: May 2004
Location: San Diego
Posts: 190
Forgot to mention.This Zenith probably does not have a menu system.A lot of older projectors used analog pots that you use to set up geometry for each tube.That's why it's important to be able to turn off all light from the tubes except the one you are sizing.You always start with the green gun first and then the other two.Once you have them equal, then you go thru the convergence steps. There will usually be pots for each color and they will have name like hpos,vpos,hsiz,vsiz,skew,bow,lin,etc. See if you can find these anywhere.Typical place for them would be in the rear of the set with the cover removed.They should be all bunched together..so, you may see ghpos,rhpos,bhpos or something like that which would refer to green,red and blue horizontal position..Vpos would be the vertical pos and so on.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:52 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.