Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-15-2008, 09:21 PM
rcaman's Avatar
rcaman rcaman is offline
VideoKarma Member
 
Join Date: Nov 2002
Location: mississippi
Posts: 753
if i were you i would not touch that g2 control untill you have checked almost every part in the set and found them good..
Reply With Quote
  #2  
Old 10-15-2008, 09:40 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Quote:
Originally Posted by rcaman View Post
if i were you i would not touch that g2 control untill you have checked almost every part in the set and found them good..
I haven't touched the G2 control yet.

Lets see: I've tested all caps in the power supply, the HOT's obviously fine, as the TV has a fine raster for the few seconds that it's on. Nothing is overheating. It doesn't even have the chance to get warm.

I thought a resistor on the CRT neck board was bad, but it turned out to be a coil that happened to look exactly like a 4 band resistor...

There is nothing burnt, or any caps with shrunken labels. This chassis actually has relatively few caps, and as far as I can see, they're all Nichicon caps. Every cap I've tested reads fine.

I'm stumped.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.