Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 06-12-2008, 01:02 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I think many of those older convergence boards had a selenium rectifier pack. These were high failure parts and can be replaced with modern silicon diodes provided that you have a schematic showing how the original rectifier assembly is wired.

Since your chassis is solid state, it may be new enough to have individual silicon diodes on the convergence board. Although these are much more reliable than the selenium rectifiers, they should still be checked.

Sometimes, the controls themselves will get so hot that they fall apart after many years of use.

EDIT: Most of the parts on that convergence board can be checked with an el cheapo DMM from Radio Shack, Wal-Mart, etc. Just be sure it has a diode test function. You'll also want to get a soldering iron, solder, and some desoldering braid. Most of the parts will need to be removed from the circuit for an accurate test.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.