Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-11-2008, 09:24 PM
dtuomi's Avatar
dtuomi dtuomi is offline
VideoKarma Member
 
Join Date: May 2006
Location: Thousand Oaks, CA
Posts: 231
Its an exact duplicate of mine. Mine has served many hours with only a few hiccups. I'm actually pretty impressed by these little sets. Very reliable.

David
Reply With Quote
  #2  
Old 03-11-2008, 10:12 PM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Those were remarkable little sets for the time. But remember....

1) The dot pattern on the screen is of exactly the same density as for larger CRTs of the time. This means iffy resolution at best.

2) Some of the compactron tubes used in some sets of this vintage are made of pure unobtainium.

It was in the early 1980s that I had one of those sets on my bench with a complete sync failure problem. After being on for about 5 minures the picture would suddenly start to spin and roll. Turned out that a triode section in one of the compactrons would develop a grid-to-cathode short after warm-up. After futile search for a replacement, and a customer that reeeeeaaallly wanted this set to survive, as he really liked the thing, I said I'll see what I can do. After some meditation over this matter I went out to my car and removed the battery, and brought it in to my bench.....

Inside of 15 minutes I was buttoning up that set--fully functional, and with that tube working just fine.
Reply With Quote
  #3  
Old 03-12-2008, 05:35 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Talking

Quote:
Originally Posted by Old1625 View Post

2) Some of the compactron tubes used in some sets of this vintage are made of pure unobtainium.

Probably because I used all them up on radio projects like this:
http://pw2.netcom.com/%7Ewa2ise/radios/compaa3.html
__________________
Reply With Quote
  #4  
Old 03-12-2008, 05:42 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Cool projects wa2ise!

I paid 50 for my portacolor, but I couldn't resist, the thing looks like it was in a time capsule
Reply With Quote
  #5  
Old 03-13-2008, 09:04 AM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Quote:
Originally Posted by wa2ise View Post
Probably because I used all them up on radio projects like this:
http://pw2.netcom.com/%7Ewa2ise/radios/compaa3.html
Nice! I added that one to favorites.
Reply With Quote
Audiokarma
  #6  
Old 03-13-2008, 10:12 PM
Whirled One's Avatar
Whirled One Whirled One is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 375
Quote:
Originally Posted by Old1625 View Post
Those were remarkable little sets for the time. But remember....

1) The dot pattern on the screen is of exactly the same density as for larger CRTs of the time. This means iffy resolution at best.
I forget the CRT numbers, but the original CRT type that GE used for the first model-year Portacolors was indeed like that, but the later one used after the first model year was much better (if you put one of each side-by-side, the difference in dot pitch is really easy to see!). However, when GE switched the PortaColor from a dot-phosphor CRT to a stripe-phosphor CRT in the early 1970's, the resolution went right back down again.
Reply With Quote
  #7  
Old 03-14-2008, 11:50 AM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Quote:
Originally Posted by Whirled One View Post
I forget the CRT numbers, but the original CRT type that GE used for the first model-year Portacolors was indeed like that, but the later one used after the first model year was much better (if you put one of each side-by-side, the difference in dot pitch is really easy to see!). However, when GE switched the PortaColor from a dot-phosphor CRT to a stripe-phosphor CRT in the early 1970's, the resolution went right back down again.
The one I had was definitely an earlier model, judging by the predominance of tubes.

The evolution of CRTs in that model of GE set is a interesting thing to know. Thanks!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.