![]() |
|
#27
|
||||
|
||||
|
Quote:
I personally use a Sencore LC53 or LC102 when reforming. I prefer my LC102 with it's full range of checks and it's ability to apply current limited voltages up to 999V. Most (95%) of the Mallory "FP" or Sprague "TVL" caps I've had for 20+ years come right back with just a reforming. CDE (Cornell Dublier) caps come back about 70% of the time, but what I have are much older than either my Mallory, Sprague, RCA, GE or Zenith NOS caps. If it fails reforming, no way would I use it. One caveat - RCA used a multisection cap on some of their Colortrak sets in the 80's - the one thats mounted horizontally in a clip on the back of the chassis - I always replace that with two or three separate caps, because the RCA replacements (Taiwanese made) usually fail quickly. Check your caps for ones with 450/475 volt ratings - the tube audio guys go nuts for them. I sold a dozen ( I had 31!) of my Zenith caps to one guy here on AK. They'll usually go for 10-15 bucks each. All of the lower voltage ones I keep and use - I've got a HP pulse gen I recapped with an old Admiral cap about a year ago, and it's still working. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Thread Tools | |
| Display Modes | |
|
|