Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-21-2003, 04:56 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
Found a 13" Space Command Chromacolor II

...

Last edited by andy; 12-05-2021 at 09:26 PM.
Reply With Quote
  #2  
Old 12-21-2003, 05:32 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
thats a nice find. space command 100 is a single button remote, which operates the tuner only. If I remember correctly, you can select a channel as the "off" selecto. For example, channel 13 could be set to turn the tv off.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Reply With Quote
  #3  
Old 12-21-2003, 06:22 PM
Carmine's Avatar
Carmine Carmine is offline
...enjoys spaghetti.
 
Join Date: Feb 2003
Location: Detroit area
Posts: 1,612
On a related subject...

I need a luminance module for a 13" ChromacolorII of the same era.

Nice set. Keep me in mind should you decide to part it out.
Reply With Quote
  #4  
Old 12-21-2003, 09:07 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
carmine, I may have the module. Let me know the module number you need.
Reply With Quote
  #5  
Old 12-21-2003, 09:42 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 09:27 PM.
Reply With Quote
Audiokarma
  #6  
Old 12-21-2003, 11:43 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Re: Found . . . 13" SC Chromacolor II

andy,

I remember those sets. I don't like the design, however, for the simple reason that it is impossible to change channels if the power tuning mechanism is not working. Why Zenith did not design this model with a manual channel selector to back up the motor drive is beyond me. This was unusual for Zenith, as most of their remote sets of that era with power tuning indeed did have a manual selector knob at the back of the set, so that the user could still operate the tuner if the power tuning drive was inoperative for any reason. The other drawback of this system, IMO, is that the automatic off function would not work either if the power tuning is itself defective (unless, of course, there was a manual on-off switch on the front panel).

I agree as well with your statement that the drive gears between the power tuning motor and the tuner probably were stripped or broken if someone tried to turn the channel selector drum manually. I think this problem occurred quite frequently with these sets when the motor drive failed; people tried to turn the drum by hand, promptly damaging the gear train.

Zenith's SC100 remote left a lot to be desired. This remote only allowed for one-way channel selection (and, of course, the auto-off function which could be set to trigger on any unused channel, not to mention channel skip for bypassing unused channels), but did not have mute or any of the other functions we now take for granted in today's IR remotes--such as complete home-theater control. (Magnavox had this, using ultrasonic control, in its high-end three-way entertainment centers of the '60s, but the control systems were mechanical nightmares comprised of very complicated mechanical drives, linkages and the like, not to mention the remote receiver itself with its own tubes and circuits. The system was set up to control TV tuning up/down, volume, mute, record changer operations and I don't know how many other control functions. My best guess is that, when these TVs got a few years on them and the remote systems began wearing out, the owners simply left them alone, as long as the TV and stereo still worked halfway decently.)

Zenith's later Space Command remotes were much better, allowing for up/down channel selection (two-way drive), volume up/down/mute, motorized remote tint/color adjustments and other refinements. However, I think today's IR remotes operate even better than Zenith's best ultrasonic systems, with more functions than those early sets--and let us not forget, today's remote systems (and the TVs themselves, of course) have no tubes to short, get weak or burn out. I have an RCA RCU800-B universal remote which I have set up to operate my TV, VCR and stereo (all separate components), and it works great. The only thing I have yet to figure out is how to get it to operate the transport functions of my bookshelf system's dual cassette decks and AM/FM tuner scanning. (Ironically, it works just as it is supposed to with the system's CD player.) There must be an IR code I haven't discovered yet--back to the manual, I guess. There are about six or possibly more control codes for my Aiwa system, some of which I haven't tried yet--oh well, maybe I'll work on it tonight. Can't be that difficult to figure out.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 12-22-2003 at 12:29 AM.
Reply With Quote
  #7  
Old 12-22-2003, 07:24 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
You're right, the IR remotes have more functions, but I still think the Zenith ultrasonic has great performance, especially the electronic transmitter type (do not have the mechanical transmitter). You can hold the hand unit in any position and the signal will get to the set. Distance sensitivity appears just as good as IR.
Reply With Quote
  #8  
Old 12-22-2003, 09:45 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 09:27 PM.
Reply With Quote
  #9  
Old 12-23-2003, 04:15 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
give me a model and chassis of your set. I might have a SM for it. If I can get a part no, I will contact moyer. They have lots of mechanical tv parts as well.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Reply With Quote
  #10  
Old 12-24-2003, 02:08 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 09:27 PM.
Reply With Quote
Audiokarma
  #11  
Old 12-24-2003, 03:57 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Yes, Andy, you're right--those small portables are very difficult to work on because of all the circuitry crammed into that small cabinet space. Portables, especially the early tube-powered and solid-state sets with small screens, in general are like that; I've seen many small sets that are even worse than your Zenith to work on (especially those small transistor portable TVs by Sony, Philco and the like; I hate to think of what it must have been like to work on the PC boards of Philco's Safari, for example, which was, I believe, one of the first all-solid-state TV sets to be sold in this country).

At 40+ pounds I wouldn't quite call the 13HC10 a portable. It seems more like a set that is put in one place and left there, or else put on a stand if the owner was interested in moving it from room to room, etc., like my RCA XL-100 or my Zenith Sentry 2. Both these sets weigh a ton and were not meant to be carried anywhere. However, I wouldn't want to be lugging a set like that around for any length of time.

The Zenith Chromacolor and Chromacolor II series were good sets when they were new, and still are today if you can find one in working order, as yours seems to be (except for the slipping tuner drive gear). I have relatives who had a Zenith Chromacolor II console, with a modular chassis, in the '70s; the set worked well for them (with few if any repairs, IIRC) and had a beautiful picture on an antenna for over 20 years. If that doesn't speak well for the reliability of earlier Zenith products (when they were still made in Chicago and Zenith meant Zenith, not GS), I don't know what does.

BTW, was I imagining things or did I see a coax cable connected (through a matching transformer) to your set's VHF antenna terminals--without a cable box? I noticed the channel selector was on channel 10, which is the NBC affiliate in Philadelphia. Were you running your cable directly to the TV, or is that coax from a standard outdoor antenna?
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 12-24-2003 at 04:03 PM.
Reply With Quote
  #12  
Old 12-24-2003, 04:34 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Tuner rebuilding

You might try this guy, I had him rebuild a couple tuners for me.

http://qualitytuner.hypermart.net/stangle.htm#pagetop
Reply With Quote
  #13  
Old 12-26-2003, 09:29 AM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
got your part!

Andy, you are in luck! I looked through my pile of zenith parts and I found the gear you need new in the bag! Part number 34-770-02. If you're still interested, give me $10 (shipping is included). Just let me know your address and it will be on its way.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Reply With Quote
  #14  
Old 12-26-2003, 11:09 AM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 09:27 PM.
Reply With Quote
  #15  
Old 12-29-2003, 11:34 AM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 09:27 PM.
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:44 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.