Quote:
Originally Posted by vol.2
In that case, I would remove the control from the circuit and test it for continuity with a DMM.
If you can rule out that the control as a problem, then you can focus on other things.
Assuming the control is okay, then my next step would be to check from the chroma signal out of the demodulation area. I personally wouldn't attempt it without a schematic though
There are other guys on this forum who might be able to point you at some part to check after that or not, but it's going to get increasingly more complex as you rule out low hanging fruit like a bad control
|
You mean that top left looking from the back? Also looks like its had a history with color problems. Some changed the board out and left the old one inside...
08-13-2026, 05:05 PM
Threaded Mode