Accidentally hit a choke coil with my soldering iron… how screwed am I?

[Penthode]

Originally Posted by Madeline12

This is not a 19T8 tube. It’s a 6T8 technically… and I’m not sure frankly, it’s just how I’ve followed the schematic. Maybe someone can provide further input.

The 19T8 is exactly the same as a 6T8 except for the filament voltage and current. It is simply the series filament string version.

The choke value is not critical. I would be curious if the circuit did anything
It's purpose is to further limit and if let open, I would be curious if there was any noticable increase in ontercarrier buzz.