|
If the vertical output transformer is shorted, unplug the convergence panel. I had both of my Zeniths (an M and an N) chassis fail identically. While waiting for a transformer, I could use them and get full sweep but outer convergence was terrible. Try to get a Thordarson transformer. They seem better built. I replaced both of mine with Thordason.
Is it the picture or is there a slight keystone to that raster? Keysone means yoke. Look for green corrosion on the youke windings. We changed a lot of Zenith yokes tears ago also.
|
10-28-2013, 02:05 PM
Threaded Mode