Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #38  
Old 09-30-2012, 09:10 PM
peverett peverett is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 883
I agree with wa2ise, replace all electrolytic and paper caps. A while back, I restored a 1953 Emerson. There was one paper cap that was hard to get to. As it only had 4 volts across it(in the AGC circuit), I left it in. Guess what the cap failed in very short order, causing picture and sync overload. I had to go back in and replace it.

A more recent experience was with a 1958 RCA portable. In this case, there were some capacitors that were packaged like the modern orange drops, so I assumed they were still ok. No! I had to replace these to get correct vertical linearity and height(which would shrink as the set warmed up). I am not sure if they were paper inside or just heat damaged. Now I just replace these as well!

40 to 50 year old caps are no good. The technology to make good, long lasting capacitors was just not available then. (I am not sure it is available now for electrolytics!).
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.