32" Sanyo... No controls inside.

[holmesuser01]

I was given a 32" Sanyo set to use instead of my 27" Sony that is 20 years old this year. The Sanyo is about 6 years old. Has a nice picture, once I got it working on the satellite box. I'm running it with S-Video and external audio from the sat box. It's programmed with the satellite remote control.

The only problem is: The guys that lifted it up and into the cubbyhole on the wall forgot to get the model and serial number off of it. I'm too old to get it out without help.

It needs a bit of tweeking on the vertical centering, and width. As with my Sony, I had to use the remote to get into the service menus. I repaired this Sanyo about 6 months ago for the guy that gave it to me. Bad soldering is all it was. I noticed then that there were no adjustment pots on the chassis.

So, without the model number, am I able to access the service mode on this set? Is there a standard Sanyo service mode entryway? If I have to get these guys back to pull it out enough to get a look at the back, I can, but it will be several weeks before it can happen.

Also, I dont have the factory remote. I heard a dog ate it.