Motorola 19K1 restoration

[bandersen]

Last fall I posted a whole bunch of pictures from a local antique shop packed with vintage TVs and radios. I stumbled across TheNixer's classified ad for a bakelite Admiral 24A12 about the same time and hooked them up. He got the itch for another set, looked through my pictures, and this time picked up a 1950 Motorola 19K1 AKA 'The Van Dyke'.

Here's an original ad on tvhistory.tv

Since it's only a couple miles from me and I've never had the chance to work on a set like this before, I volunteered my services to get it running again.


The cabinet is in rough shape like every set at that shop. Someone there really liked to stack heavy crap on the set and gouge into them. The doors and sides are in much better shape. The door pulls are missing though. Does anyone out there have the same set or know what pulls are appropriate ? I'm only going to be working on the chassis. I hope someone else can do a nice job on that cabinet.




The insides are in much better condition. I was a little concerned about the 19AP4 when I saw the damaged base, but it tests very strong. It's a factory rebuilt CRT with an 'S' stamped on the neck. I've never work with such a large CRT so am being extra careful. I plan on using a little 5AXP4 during the restoration.

Only a fragment of the back remains.


Dual speakers and integral antenna


Only two screws were left holding the chassis in That's why I always remove chassis and picture tubes for transportation if possible.