Quote:
Originally Posted by radiotvnut
I just had another thought. I've never experienced this on a Philips; but, I've heard that on newer Philips sets that the master G2 control (on flyback) must be set correctly or the TV will shutdown. I have experienced this on a newer RCA that I replaced the flyback in. It was a trial and error process; but, I finally got it adjusted where the set would stay on.
|
The VG2 control can be adjusted without having to take the case off. I doubt that's the issue.
On a hunch from a post on another forum, I started looking at the resistors on the CRT neck board. I found a 25-26 ohm resistor that reads only 1 to 4 ohms. When I can, I'll replace it and see what that accomplishes.