![]() |
|
#1
|
|||
|
|||
|
Hitachi VT-7S & VT-6800S
hi !
this is my first post on this forum 2 weeks ago , I bought these 2 portable VHS (the 6800 comes with its separate tuner) Of course there were belt issues once changed, it appears that : - the vt-7s is almost 100% working (sound and picture ok) but picture is not perfect -the vt-6800 plays too fast !!! I can ear the sound of the tape too fast !! (in that case , there is not picture of course .) So I 'm hoping ideally for the SM or some advice Also I am afraid these 2 vcr are secam only pal tapes play b&w but it may be a setting that is completly offset best regards ... from France . |
|
#2
|
|||
|
|||
|
If I really was into electronics and all i would see if I could fix the speed of PAL movies so the video/audio WAS THE RIGHT SPEED! (May be possible with some tweaking of the motor,etc)
Good to see your first post my friend!! |
|
#3
|
|||
|
|||
|
hi !
well , as far as I know, there is not a trimmer to adjust in vhs , the speed of the tape is controlled by ... many things (there are some analogic "loops" ) for instance; the drum is accurately synchronysed with picture frequency (180° of the drum = half a picture ; odd or even) but I don't know exactely what control the speed in vhs and not in this particular model I thing it has something to do with the "ctl" signal which is recorded next to the linear audio... |
|
#4
|
|||
|
|||
|
Ya probably so... Its nice to think about such things though!
|
![]() |
|
|