Quote:
Originally Posted by ctc17
3.58 trap? You mean 4.5 trap?
Before you go twisting coils verify its not something in the house interfering with the set. printers, these new electronic ballasts etc can cause that.
Leaky/bad phase diodes can cause the jittering and bars. Leakage in the yoke can cause the bars too.
Just because you changed the paper and electrolytics your not golden. I am seeing more and more leaky/shorted/lossy red and orange drops. The domino style mica. paper/mica are always bad where there is more than a few volts across them.
Just some notes to consider
|
ok, This set does not have any mica or red/orange drops left in it.
No mica's .....period...never had any. The red/orange I group together with paper mentally because I do not trust them and replace them all. I still have the resistors and one cap in the yoke assembly to check/replace.