View Single Post
  #27  
Old 05-20-2012, 10:27 AM
lnx64's Avatar
lnx64 lnx64 is offline
VideoKarma Member
 
Join Date: Jan 2012
Location: New Port Richey, FL
Posts: 1,787
I don't want to take apart the TV right now so I'll try and attenuate it externally. The TV also has 300 ohm screws, could I just use one of those adapters, 75 ohms to 300 ohms to attenuate the signal, since they would have slightly signal loss?

EDIT: Actually, on the Hitachi, there's some ringing too: http://img.photobucket.com/albums/v3...n/IMG_0226.jpg

But it doesn't bleed it's colors unless the contrast is cranked up, cause IT does have a weak CRT.

EDIT: Tried different cables, all same results. I even tried cables I made, using RG-6 with compression fit ends.

Last edited by lnx64; 05-20-2012 at 10:31 AM.
Reply With Quote