Sencore SM-159 Speed Aligner Schematic/Manual
 

I just got a Sencore SM-158 Speed Aligner. Unfortunately, no manual or schematic was included.

Does anyone know where I can find a manual and schematic?

Thanks.

I probably have one with my Speed Aligner, at home. I'll check this evening. Do you have the bias supply as well? It was an accessory, but needed for most jobs.

Cheers,

I don't have a bias supply yet other than the one on my 1077 B&K analyst. Sounds like a good time to build one......

I couldn't find the manual, but I do have the Sencore Speed Aligner Work Shop manual, with step-by-step instructions on how to use the speed aligner on a set. They use an Admiral K10 chassis as the work example, and cover all of the pads and detector probe, as well as the BE156 Align-O-Pak bias supply.

The manual has a springy fold, so I'm flattening it out tonight and can scan it tomorrow either at work or here. It's hard to manhandle on the scanner and keep it straight, so hopefully it'll flatten out tonight.

Here's a relevant thread on the speed aligner:

http://www.videokarma.org/showthread.php?t=246891

Scan of the workshop manual coming tomorrow....

That's great. Let me know how the scanning goes.

Many thanks.

Tom,

PM sent with link.

...and here's the schematic.

PM reply sent to you. Many thanks for the schematic.

Tom