Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Rectangular Screen Tube Televisions (http://www.videokarma.org/forumdisplay.php?f=45)
-   -   Nordmende Vision V 380 Vhs (http://www.videokarma.org/showthread.php?t=178685)

firenzeprima 08-12-2008 06:50 AM

Nordmende Vision V 380 Vhs
 
Rare VHS Nordmende of the 80s. this unit cost to age more than 2,000,000 lira. was the top VHS video recorders. 4 / 8 hours for registration, 4 heads, stereo audio, audio dub, mechanical servo, built-in tuner, can store 12 channels, timers, fw / rew slow motion, fast speed fw / rew x2, camera taken hb 15 trd, exit and rf composit video and stereo audio on din German infrared remote control. a real jewel of mechanics (JVC) restored and fully functional!

bgadow 08-12-2008 10:08 PM

I had many German radios at one time but got rid of all but a few-all the ones I saved are Nordmende. Good products. Neat to see this! This is made in Japan? Were any VCR's made in Europe? Is Nordmende still around?

Telecolor 3007 08-12-2008 10:15 PM

"Nordmende" isn't around any more. It had the same destiny as "R.C.A.", "Zenith"... :tears: But I don't think it was bought by Chinesee, it was bought by the Turks... (Turkish made tv sets are have a little bit more qualty then the Chinesee ones).

andy 08-13-2008 12:07 AM

...

firenzeprima 08-13-2008 01:01 AM

Quote:

Originally Posted by bgadow (Post 2050667)
I had many German radios at one time but got rid of all but a few-all the ones I saved are Nordmende. Good products. Neat to see this! This is made in Japan? Were any VCR's made in Europe? Is Nordmende still around?


Nordmende was a mark of prestige European, and also very expensive, in past years. now belongs to the group Thompson, who also owns Telefunken, Saba, and with supreme regret, even RCA
THE VHS I believe, very likely, everything was built in Japan by JVC under the names Nordmende and then imported into Germany, inside you see that made in Japan or U.K.. the only thing is the small German label of paper pasted on the panel rear (see picture)
fernando

firenzeprima 08-13-2008 01:09 AM

Quote:

Originally Posted by andy (Post 2050836)
That looks like a JVC to me.

I worked on a Grundig VHS VCR a few years ago. It was made in Europe and was completely unlike any other VCR I had ever seen. The most unusual thing about it was that it used the "U" threading design (like Beta) instead of the "M" system that VHS normally uses. It also had the most complex and unusual clock/timer interface I had ever seen. It was very expensively made, but not the most reliable design.

Grundig yes, like Philips, built by the solie VHS, perhaps you have seen a vs. 320 or similar. a real jewel of mechanics. "all made in germany" I had 2, now only one, a small "u-matic" as mechanics with 5 electrical motors of Papst Switzerland. mechanical iron aluminum servo. not like that now with only one engine are all the functions and are in practice all plastic


All times are GMT -5. The time now is 08:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.