Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   Did anyone hear about this? (http://www.videokarma.org/showthread.php?t=253908)

fox_rivers 04-04-2012 02:13 AM

Did anyone hear about this?
 
I had recalled the story as I was randomly browsing ebay. I still find it hilarious. http://i65.photobucket.com/albums/h2...rivers/256.gif

jbivy 04-04-2012 03:03 AM

Oh wow.. I have to wonder if this is a joke, at least I hope it is.

Sandy G 04-04-2012 07:40 AM

Oh, Prunella...

Electronic M 04-04-2012 09:31 AM

Pffffffft! :lmao: Ya know, there are actually folks that stupid out there.......When I was between 5 and 8 years old I intentionally busted the base and glass seal on a 21" CRT that is in a set that had been (and still is) rotting in the woods for decades because my folks had me psyched out about TVs storing lethal juice years after being plugged in, and I some how got it in my head that that hissing was the HV discharging, and that the HV was somehow stored in that gas that leaked out. I chafe at the thought that I was once that stupid!

DavGoodlin 04-04-2012 09:59 AM

Doesn't that silver stuff inside the glass mean the tube is bad?
You know, like the dark ends on a fluorescent tube mean its bad?

electroking 04-04-2012 10:18 AM

Did you hear the one about the QA inspector that received a lot of 2-amp fuses
and that dutifully reported that 'every fuse in the lot opened within 10 seconds
when tested at 4 amps as specified'?

Eric H 04-04-2012 12:15 PM

You see so many eBay listings where the seller suggests a tube is bad because it has a burnt spot inside.
If you just replace that burnt out tube it'll probably work.

josephdaniel 04-04-2012 03:49 PM

Someone should email this person and ask the seller to try the tubes agan in the amp and act like you have an intrest i gaurentt the seller will act like the tubes work to also ask for a photo of them in th amp...

W3XWT 04-04-2012 04:28 PM

Ever hear of Atmosphere Tubes???

snelson903 04-04-2012 06:01 PM

i have nothing to say,i've hurd everything, nobody can be that stupid. what would he do with a light bulb ???

stromberg6 04-04-2012 06:08 PM

Quote:

Originally Posted by snelson903 (Post 3031474)
i have nothing to say,i've hurd everything, nobody can be that stupid. what would he do with a light bulb ???

If he's that much of a dummy to pull that BLEEP with 7591A's, he can eat the light bulb. Maybe also some Z-9 silicone compound to help it go down. :D

Sandy G 04-04-2012 06:59 PM

And these people are allowed to vote, breed, drive cars...

rcaman 04-04-2012 07:36 PM

:smoke::smoke::smoke::smoke::smoke:yes i am afraid these people are allowed to vote and DRIVE A CAR...

Eric H 04-04-2012 09:16 PM

These pictures first appeared quite some time ago, pretty sure it was a joke being played.

mstaton 04-04-2012 09:28 PM

About as dumb as a box of rocks.

Einar72 04-04-2012 10:49 PM

April Fewl?

Username1 04-06-2012 06:42 PM

hey thats my line! "About as dumb as a box of rocks."

Reece 04-07-2012 08:03 AM

Those tubes might still work, in outer space...

N2IXK 04-07-2012 10:10 PM

Hey, they could have been NOS WE 300Bs...:yikes:

Dude111 04-08-2012 12:24 AM

Quote:

Originally Posted by jbivy
Oh wow.. I have to wonder if this is a joke, at least I hope it is.

I would hope so!

N2IXK 04-08-2012 04:34 PM

Quote:

Originally Posted by Reece (Post 3031806)
Those tubes might still work, in outer space...

Unfortunately, they wouldn't, unless they were transported to space intact, and then broken open.

Once the oxide cathode coating is exposed to air, it reverts to an inactive carbonate mixture which will not emit electrons.

The emissive coating is originally applied as inactive carbonates, but it is then "activated" (reduced to oxide) by a special thermal processing stage (so-called "hot-shot") during evacuation.

You would need to go through the whole process again (if even possible) before the tubes would work again, even in a vacuum.


All times are GMT -5. The time now is 06:01 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.