Re-acquired my Sony KV-1204A...

[ESigma25]

Originally Posted by zeno

You will NEED OEM only
1) SG246A IIRC subs to a SG613
1) 2SC867A
1) damper diode. It has been updated with new part number.
1) resistor in the hoz drive usually burns. Need manual to get value.
1) manual with MATCHING chassis number.
Change it ALL AT ONCE !

One of 3 things will happen
1) everything will blow again in one microsecond.
2) set will work perfect then usually withing a week blow everything
without any warning.
3) the set will work for years more.

HINT most Sony color sets between apx 1975 & 1980 used the
SG613 & 2sc867. If you get one with a bad CRT but the set works
pull those parts, they are not cheap. Dont reuse the damper.

73 Zeno
LFOD !

Sounds like I need to pay 22 bucks for the Sams after all.