Color? Roundie in PA

[Kamakiri]

Yep, all three are out. Between which pins should there be continuity?

[rca2000]

Originally Posted by Kamakiri

Yep, all three are out. Between which pins should there be continuity?

I THINK it is 1 and 14 for the fils..

PRAY..it is just bad connections in base !!

Can you tell if the getters look ok? If they DO--air is NOT likely a problem..

[Eric H]

Originally Posted by Kamakiri

Yep, all three are out. Between which pins should there be continuity?

I hate to be the voice of doom and gloom but dead heaters in a 21AXP is likely due to the tube going to air, pull the yoke and see if the getter is white, It's located in a thin band between the inside Dag around the neck.

[DaveWM]

yep if the getters are white game over (hicks).

[Phil Nelson]

Originally Posted by Eric H

pull the yoke and see if the getter is white, It's located in a thin band between the inside Dag around the neck.

Here's what the getter looked like in my gone-to-air 21AXP22:





Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html