Scored A 1953 PHILCO

[compucat]

Originally Posted by Eric H

Thanks Bob but I like the look of brass cover they put over the hole for the UHF tuner, UHF is useless now anyway.

I used to avoid VHF only sets because most of our local stations were on UHF but now I like them because all I need is channel 4 for DTV boxes or channel 5 for my Blonder Tongue agile modulator.

[dieseljeep]

Originally Posted by Eric H

Thanks Bob but I like the look of brass cover they put over the hole for the UHF tuner, UHF is useless now anyway.

"High Fidelity" "Golden Grid"


Here's an old video of my 53 Philco working, the video is lousy but that "High Fidelity" sound comes through pretty well.
Not sure what tube these use for Audio Output or if it's Push-pull?

The combination sets used a S.E. 6L6 and the TV only models used a S.E. 6V6. The UHF tuner kit used an adaptor that plugged into the audio output tube socket, for the B+ and heater source.

[cwmoser]

Originally Posted by compucat

I love that style of set. It looks like a 17" screen. I know many people including collectors are not too excited about the typical 1950s console but I really like the style of them, even the plain ones. Many of them seem to have good build quality also. I would love to have had one of those NOS Philcos.

I think the 1953 Philco has got to be one of the most beautiful TVs.
Lots of eye-canday with that set. The brass pieces were done
very tastefully.
Someday, when I encounter one, I'll add it to my collection.

Carl

[Charlie]

Damen, that Philco sure is pretty! I've also always liked Eric's Philco... I know he's had that one for a long time.

As Carl mentioned, Philco's of that time sure were nice!

[damen]

Here it is up and working lots of work with all the recapping and resisters but the hard work paid off. Had to stay with selenium rectifiers case I could not get it to work right with silicon diodes but works good this way

[Charlie]

Damen, that's awesome looking! Looks like it makes a really nice picture with good contrast.

[kvflyer]

Damen,

That sure does look great! Makes you feel good when it works doesn't it? Thanks for sharing your efforts...

[cwmoser]

Nice. Classic 1950's TV.
Its a set that I have always had a eye for.

Carl

[Kevin Kuehn]

Excellent resto. Picture looks super sharp.

[damen]

Any chance anyone has a junk chassis with a good on off volume control for this Philco you would sell? I had to add a wire to the on off switch cause it is open and Moyers did not have one.

[Tim]

The set is looking good.

Got a photo of the switch? Manufacturer of the control? Philco part number? I have a lot of old controls but would need more info to provide the correct part.

[damen]

Originally Posted by Tim

The set is looking good.

Got a photo of the switch? Manufacturer of the control? Philco part number? I have a lot of old controls but would need more info to provide the correct part.

Thanks Tim
The switch in it is a 1 piece replacement switch it is one piece and dark blue in color I will add the number off it on here later since I am at work the Sams shows it uses a 2 meg pot with a 1 meg tone tap and 2" shaft the Philco part number is 33-5564-14 Centralab is BT-82-S Mallory is UT-451 with US-26 Switch Clarostat is AT-116 shaft is FS-3 and switch SW-a IRC is Q18-139X with 76-1 switch.

[Don Lindsly]

I have an NOS original Philco control available. Send PM if interested.

Don

[47'Plymouth]

I've got your Philco factory Year book pages copied like what we discussed the
Other night on the call!, if I can find those new envolpes,I get out ASAP
I haven't forgot ya,...I call ye when I put it in the mail on the phone
It covers the model right before yours with seleninum rectifiers!

[Reece]

That set looks showroom, and what a picture. Suddenly, it's 1953 again!