Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-08-2011, 09:51 PM
Glenz75's Avatar
Glenz75 Glenz75 is offline
NZ Vintage TV Collector
 
Join Date: Jun 2002
Location: Wellington, New Zealand
Posts: 311
1960's NZ Murphy Television. Project Done!

Hi guys, well the TV collection has grown yet again...Just the other day I picked up this New Zealand made Murphy 23 inch B&W Television for a few dollars.

It would be from the mid 1960's at a guess and I quite like the look of this one too.
Hasn't been turned on for about 20 odd years according to the previous owner, they were going to turn it into a fish tank display or something but had sold the house and were about to move house so thankfully the set was saved.

The chassis is basically an AWA 35 Series variant, and pretty certain that it was based on an Australian design. I have another Murphy and two AWA sets with the same chassis as this. From what I've been told they were reliable and performed well. On the back cover it does say 'Manufactured under license from Rank-Bush Murphy Limited'

The deflection yoke plastic shroud that holds the geometry adjust rings has decomposed and the filter caps are leaking and bulging so before I apply any power to this I'll temporarily tack some filter caps in place and then see what happens. May be a while before I get to doing this part but you never know curiosity may get the better of me.

The photos were taken with my new iPod touch as I was curious about the picture quality, not as good as a digital camera but still acceptable.

I've also done a video on You Tube about this, here is the link - http://www.youtube.com/watch?v=8CThn6yz8fE

Enjoy!

Cheers Glen
Attached Images
File Type: jpg IMG_0008.jpg (93.7 KB, 104 views)
File Type: jpg IMG_0010.jpg (86.5 KB, 55 views)
File Type: jpg IMG_0011.jpg (70.0 KB, 73 views)
File Type: jpg IMG_0012.jpg (96.9 KB, 125 views)
File Type: jpg IMG_0014.jpg (106.6 KB, 109 views)
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/

My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn

Last edited by Glenz75; 12-23-2012 at 05:46 PM.
Reply With Quote
  #2  
Old 11-09-2011, 12:16 AM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
Nice! That chassis looks alot like Packard Bell BW sets from that era. Very well made.
Reply With Quote
  #3  
Old 11-09-2011, 12:53 AM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Nice!! I really like the upright chassis design in this & other tv's.
Who is the Rank in Rank-Bush? any affil. with Rank-Arena?
Reply With Quote
  #4  
Old 11-09-2011, 05:01 AM
Glenz75's Avatar
Glenz75 Glenz75 is offline
NZ Vintage TV Collector
 
Join Date: Jun 2002
Location: Wellington, New Zealand
Posts: 311
Thanks for the comments guys Yes I think Rank Bush were tied up with Rank Arena.

Here is a link to an older thread showing two sets I got earlier in the year using the exact same chassis at this one and some extra photos below of those two sets.... http://videokarma.org/showthread.php?t=251672

Cheers...

Quote:
Originally Posted by zenith2134 View Post
Nice!! I really like the upright chassis design in this & other tv's.
Who is the Rank in Rank-Bush? any affil. with Rank-Arena?
Attached Images
File Type: jpg IMG_4267.jpg (57.7 KB, 46 views)
File Type: jpg IMG_4268.jpg (61.2 KB, 42 views)
File Type: jpg IMG_4274.jpg (45.8 KB, 33 views)
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/

My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn
Reply With Quote
  #5  
Old 11-09-2011, 09:02 AM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
それはすごいね!(That's cool!) I like the "Super Signal" written at the bottom of the bezel. How many I.F. stages does she have? Is there something to that or was that a marketing thing? Why does it have a channel 1??!!

きをつけて、
Mark
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26

Last edited by zenithfan1; 11-09-2011 at 09:07 AM.
Reply With Quote
Audiokarma
  #6  
Old 11-09-2011, 10:24 AM
electroking's Avatar
electroking electroking is offline
a- v- karma member
 
Join Date: Dec 2007
Location: Montreal (QC), Canada
Posts: 743
Quote:
Originally Posted by zenithfan1 View Post
それはすごいね!(That's cool!) I like the "Super Signal" written at the bottom of the bezel. How many I.F. stages does she have? Is there something to that or was that a marketing thing? Why does it have a channel 1??!!

きをつけて、
Mark
I guess many countries did plan a TV channel 1, and did not delete it later...
In the U.S.A., channel 1 was soon found to be useful for some other
applications, and as UHF was growing removal of one VHF channel was
deemed to be acceptable.

What is the function of that strip of power transistors? Fine looking
set, built during my childhood, so definitely worth a restoration!
Reply With Quote
  #7  
Old 11-09-2011, 11:13 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
What is the function of that strip of power transistors? QUOTE]
According to the adjustment locations on the back, those are really pots. They do look like TO-3 cased transistors.
Reply With Quote
  #8  
Old 11-09-2011, 02:41 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by electroking View Post
I guess many countries did plan a TV channel 1, and did not delete it later...
In the U.S.A., channel 1 was soon found to be useful for some other
applications, and as UHF was growing removal of one VHF channel was
deemed to be acceptable.

!
We never did have any channel 1 stations get on the air. The old 45MHz FM band was there, and David Sarnoff of RCA, who decided he didn't like Edwin Armstrong (the inventor of FM, and built a network of FM stations on the 45MHz band) anymore wanted to kill FM radio, and convenced the FCC to relocate that band for TV's channel 1. And kick FM radio to 100MHz, and Sarnoff figured that would bankrupt FM radio. And get rid of a competitor to TV set sales. Sarnoff did freak when the FCC decided to make TV sound FM instead of AM. He had RCA not pay patent royalties to Armstrong, who had the FM patents. My own speculation: Had Armstrong pointed out to Sarnoff that FM sound would help make TV a killer app... Who knows... Anyway, 45MHz FM was to stop in 1950 to make way for TV channel 1, but it was found that 45MHz had a tendency to propagate long distance to other cities when the solar weather was right (sunspots and such) and that would make a mess of analog AM video modulated television. Before the DTV changeover, you would sometimes see this on analog channel 2. Later TV set makers went from an IF of 22MHz to 45MHz, which would not have worked on a channel 1. And the old 45MHz band ended up with police and fire comms.
__________________
Reply With Quote
  #9  
Old 11-09-2011, 03:14 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
I have a 1984 RCA with digital tuning which can tune channel-1 but I wonder what frequency that actually is on this tv. The raster goes blank on that channel.
Reply With Quote
  #10  
Old 12-01-2011, 08:46 AM
Fritze-AR Fritze-AR is offline
VideoKarma Member
 
Join Date: Feb 2011
Posts: 7
Quote:
Originally Posted by wa2ise View Post
Who knows... Anyway, 45MHz FM was to stop in 1950 to make way for TV channel 1, but it was found that 45MHz had a tendency to propagate long distance to other cities when the solar weather was right (sunspots and such) and that would make a mess of analog AM video modulated television. Before the DTV changeover, you would sometimes see this on analog channel 2. Later TV set makers went from an IF of 22MHz to 45MHz, which would not have worked on a channel 1. And the old 45MHz band ended up with police and fire comms.
Some stations that stayed and/or used native RF channels 2-6 for DTV can be decoded during Sporadic E's (short-skip). Received/DX'd several Low-VHF DTV stations in this manner, including WBRA, KOTA, WPVI, KDLO, WRGB (and pre-"transition" WKYC-DT 2 before they moved to RF 17 post-transition).

But to bring the subject back on topic, nice photos of that TV.

Last edited by Fritze-AR; 12-01-2011 at 08:59 AM.
Reply With Quote
Audiokarma
  #11  
Old 12-20-2011, 09:35 PM
Glenz75's Avatar
Glenz75 Glenz75 is offline
NZ Vintage TV Collector
 
Join Date: Jun 2002
Location: Wellington, New Zealand
Posts: 311
Hi, here is a bit of an update on this TV... I got curious and started poking around the chassis and decided to temporarily put in some 100uf filter caps in the power supply and change the boost caps just to be safe and attempt to fire the set up.

Using the variac I wound the voltage up I could hear things rustling and noises from the speaker, then the vertical kicked in, so I wound the variac up a bit more and there was an odd squeal from the flyback, glanced at the 1B3GT and it was lighting up a pretty purple inside! Hmm...me thinks that tubes a bit gassy so I put another good one in and powered on again and this time we had EHT but no picture or even a raster.

Checked voltages around the video stages, all appeared to be ok there and the cathode volts to the crt was within spec. I turned the set off to see if anything would happen and as the EHT collapsed there was a small bright image on the screen....ah-ha... Seemed like the CRT was being cut off. I didn't get much further that night as was very tired.

Looking at it again with fresh eyes I checked the grid volts on the crt base and as the circuit stated this should have been at least 80-90 volts on pin 2 and varies with brightness.
Mine measured around 40 volts on the grid... We have a problem here!
Started checking things in this part of the circuit the resistors in series with brightness pot and a 100k to ground which checked ok but there also were some 0.1uf coupling caps which turned out to be leaky, replaced them and I now get a picture although its lacks width and the verticals all up the creek, but at least the TV is now functioning and its producing sound and a picture of sorts, so a good start so far.

My next move is to investigate the lack of width, the picture is not very bright and the EHT is lower than it should be at full mains voltage so will look into that and then will sort out the vertical which may improve when the width is sorted.

There are a lot of wax paper caps in this one so replacing those will only improve things no doubt and I can bet there are a few resistors that have drifted way off also.

That's all for now. Stay tuned...

Cheers Glen.
Attached Images
File Type: jpg IMG_4554.jpg (60.4 KB, 42 views)
File Type: jpg IMG_4552.jpg (102.6 KB, 24 views)
File Type: jpg IMG_4551.jpg (128.9 KB, 26 views)
File Type: jpg IMG_4550.jpg (141.3 KB, 26 views)
File Type: jpg IMG_4549.jpg (102.6 KB, 35 views)
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/

My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn
Reply With Quote
  #12  
Old 11-09-2011, 04:27 PM
Glenz75's Avatar
Glenz75 Glenz75 is offline
NZ Vintage TV Collector
 
Join Date: Jun 2002
Location: Wellington, New Zealand
Posts: 311
Thanks, yeah its a neat looking set. It has three I.F. stages. I think the super signal was probably a marketing thing but these were good sets so maybe a bit of both. Channel 1 - There used to be a TV channel operating at that frequency in the early days of broadcasting in New Zealand.

Quote:
Originally Posted by zenithfan1 View Post
それはすごいね!(That's cool!) I like the "Super Signal" written at the bottom of the bezel. How many I.F. stages does she have? Is there something to that or was that a marketing thing? Why does it have a channel 1??!!

きをつけて、
Mark
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/

My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn
Reply With Quote
  #13  
Old 11-09-2011, 04:32 PM
Glenz75's Avatar
Glenz75 Glenz75 is offline
NZ Vintage TV Collector
 
Join Date: Jun 2002
Location: Wellington, New Zealand
Posts: 311
Thanks for the positive responses to this TV guys I think I may be prompted to having a go and seeing whether I can get some life out of this beast. Thankfully it hasn't been moved too far into the depths of my storage area so its nice and easy to move back into the workshop

Attached is the schmatic for your interest.

Cheers
Glen
Attached Files
File Type: pdf AWA 35 Series.pdf (868.9 KB, 29 views)
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/

My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn
Reply With Quote
  #14  
Old 11-09-2011, 05:18 PM
stromberg6's Avatar
stromberg6 stromberg6 is offline
VideoKarma Member
 
Join Date: Sep 2004
Location: Ellington,CT
Posts: 465
Smile

Quote:
Originally Posted by Glenz75 View Post
Thanks for the positive responses to this TV guys I think I may be prompted to having a go and seeing whether I can get some life out of this beast. Thankfully it hasn't been moved too far into the depths of my storage area so its nice and easy to move back into the workshop

Attached is the schematic for your interest.

Cheers
Glen
Thanks Glen for posting the schematic. A very good straightforward circuit, but I'm intrigued by the "video control" circuit, V-205A 6CG7. It looks like a variable voltage source that controls the gain of the video amp. Can't recall seeing exactly that setup, and it looks like the picture from that chassis might be very stable across the gray scale, and through minor voltage variations. It's always the "little extras" in circuit design that are most interesting to me. Please keep us posted if you restore it!
Kevin
__________________
stromberg6
Reply With Quote
  #15  
Old 11-10-2011, 12:22 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Quote:
Originally Posted by Glenz75 View Post
Thanks, yeah its a neat looking set. It has three I.F. stages. I think the super signal was probably a marketing thing but these were good sets so maybe a bit of both. Channel 1 - There used to be a TV channel operating at that frequency in the early days of broadcasting in New Zealand.
Thanks Glen!
からだにきをつけて。
Mark
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26

Last edited by zenithfan1; 11-17-2011 at 01:00 PM.
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:03 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.