![]() |
|
|
|
#1
|
||||
|
||||
|
If you don't absolutely have to have actual Sprague (Vishay) -brand Orange Drop capacitors, Mouser (www.mouser.com) has Cornell-Dubilier DME caps with 630V ratings with values up to 2.2 uF.
These are metallized polyester caps, and while I've never bought these in such high values, I must say I've been pretty happy with the ones I've used so far. I bought a bunch of 630V-rated versions (they're available in voltage ratings from 100VDC to 1000VDC) of these in several different values from Mouser a while back, and so far they've been nice. They're quite a bit smaller than Orange Drops-- the smaller size and the flatter shape of them makes them easier to fit in crowded areas (in my opinion). I like their overall appearance better too-- they're a muted dark brown-orange color that I think blends in more nicely with existing components in an old chassis or PC board a lot better than the bright-orange color of Orange Drops. They're also significantly less expensive. I don't know if their current handling is comparable to Orange Drops, but perhaps someone else here knows and/or has had experience with these..? (Note: If you're trying to find these in the Mouser catalog (.pdf version is available on their web site), the Cornell-Dubilier DME caps are on page 671; they also sell Sprague Orange Drops, and they're on page 679) |
|
#2
|
|||
|
|||
|
I have also used the caps similary to those mentioned by whirled one in some applications. I have not had any issues to date. The 0.1 mfd value is the largest that I have used. The ones that I have used are dark blue, not brown, purchased from local radio club members.
|
|
#3
|
||||
|
||||
|
Waiting for these caps to arrive is killing me.
Everything I order from Canada always looks like a bomb... Last summer it was a thermostat for my 1950 Kelvinator fridge, now it's a box of capacitors. I suspect this stuff is sitting in customs waiting to see if I'm on a "terrorist" list. I should have just stood on the banks of the Detroit river and had them float it over from Windsor. Ugh.
__________________
From Captain Video, 1/4/2007 "It seems that Italian people are very prone to preserve antique stuff." |
|
#4
|
||||
|
||||
|
The Caps are here! The Caps are here!
Actually, they arrived a few days ago.
I was all set to reward myself with some old TV work after doing a bunch of less-fun stuff over the past few days. So I warmed up the old soldering iron and sat down to work... ...And quickly realized that I had forgot some of what I had taken apart a few weeks ago... I had unsoldered two capacitor cans, and now I can't be sure how they were installed. One was a 160 mfd can, and the other was a 160mfd/80mfd can. I did label the leads, but here's the problem: One of the leads was soldered from one terminal of the 160mfd can, to another terminal on the other 160mfd/80mfd can. I labled them both "160mfd". Here's a pic: ![]() Now one of these I marked with a square (as per the can) so I'm pretty sure it leads to the + side of a 160mfd cap. However, the other lead is simply marked with a triangle (again, per the can). I might assume that this side was the - , but why would there be TWO leads to negative? As was mention by someone else earlier, one of these cans does not "ground" to the chassis... Should I assume the others do? Can someone tell me if this is correct: Lead labeled 80mfd connects to the + side of an 80mfd cap, - side of cap to chassis. Lead labeled 160mfd (square) connects to the + side of 160mfd cap (I actually already did this in the photo) - side of cap to ??? (Because this cap was not grounded to chassis) Leads labeled 160mfd (triangle) connect to ??? This is damn hard to explain in a written post...
__________________
From Captain Video, 1/4/2007 "It seems that Italian people are very prone to preserve antique stuff." |
|
#5
|
|||
|
|||
|
Quote:
I took a look at the picture you put up when your set went down and it looks like there are two yellow wires that went to the - side of the isolated 160 uf cap. One brown wire to the + side. Double check that to make sure I am not wrong. Just look at the can caps and see how they are mounted to the chassis. Check and see if they go to the chassis ground or have a sleeve to isolate it from chassis ground. The 160 and 80 uf can should go to chassis ground but still double check the picture on that one too. On most can caps the metel can itself is the ground side of the caps in it. |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|