Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 11-16-2006, 11:23 PM
Jonathan Jonathan is offline
AK Member
 
Join Date: May 2005
Location: Pennsylvania
Posts: 326
Well, I plugged it in and I got smoke from the power transformer. I had my meter attached to the B+ and +275V points. B+ was about 380V, the +275V point off the bleeder resistor was about 340V. I don't leave it on long enough for anything to come out of the speaker. Right now I'm stumped because nothing gets hot, nothing else burns expect for the transformer. The voltages seem right. Other than a bad transformer, what else could be wrong?

Thanks.

Jonathan
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:19 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.