Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 11-10-2006, 01:56 AM
N9ZQA's Avatar
N9ZQA N9ZQA is offline
VK Member
 
Join Date: Feb 2005
Location: Joliet, Illinois
Posts: 161
John -

No high voltage whatsoever at the moment. This was indeed a sudden failure - the damper tube arced a couple of times, but the set was still working when I turned it off 15-20 seconds later. I didn't power it up again until after I replaced the damper tube (about a week or so), and it was dead at that point.

Re: tuning the frequency: I'm going to bring my function generator home from work tomorrow to set up my scope; that way I can make sure that the oscillator is indeed on frequency.

There is a horizontal efficiency coil in the plate circuit of the damper tube.

I'll scan in the high-voltage section of the schematic tomorrow and post it.

Thanks!

Jim
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.