Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 11-02-2006, 01:41 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Post

Quote:

" I get 1.8 ohms across the ac line with the filters disconnected."

That seems a bit low. What filters are disconnected? I would do what chad suggest. Disconnect all secondary leads and see if the problem persists. If so, then there are probably shorted turns in the primary.
1.8 ohms isn't outside reason. I just measured the primary of my RCA TV set (it works quite well, other than a weak CRT that wants a brightner to work well) from 1957 and got 2 ohms (using a DVM on ohmmeter mode across the power plug pins with the set's power switch turned "on", which presents to me the transformer primary without having to take the back off the set). The impedance of the primary winding of the power transformer at 60Hz is what limits the current to a lot less than a pure 2 ohm resistor would draw.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.