|
Update
Finally got back to the set after a week or so of other responsibilities and commitments. Have been looking at the various waveforms in the service manual and comparing them to what I get on the scope. All of the waveforms are almost dead-on in terms of shape, but a couple are out of whack voltage-wise. For example, the plate of the oscillator control should have a ~75V sine wave, but it's only about 5 or 6 volts. I've got some capacitors on order and will change them out when they get here. Based on what I'm seeing and what other forum members have said, that's probably my best course of action. Will keep everyone posted.
Jim
|
10-11-2006, 11:44 PM
Threaded Mode